Transmit/Receive Switch

IFI offers RF microwave transmit and receive switches (TR switches).

Transmit Receive Switch, Model TRS-1000M-500M-500W

 

500 MHz – 1000 MHz

500 watts
Rated Power

Transmit - Receive Switch Features:

  • Instantaneous Frequency ranges
  • Rugged Construction
  • High Reliability
 

Transmit Receive Switch - Model TRS-1000M-500M-500WInstruments For industry, is a supplier of state-of-the-art RF power amplifiers and accessories covering broadband frequencies for virtually limitless applications. IFI supports a variety of markets with a full line of advanced products. Many of our products are specifically designed for EMC, EW & ECM applications so we also provide our customers with a wide range of RF & Microwave accessories to compliment other applications. These products are available in a wide range of power levels from a few watts to hundreds of watts for narrow and broad band frequency ranges. IFI’s RF products are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Our Technology Innovations are critical in supporting and meeting customer requirements. Call us with your requirements!

 

Transmit Receive Switch Model: TRS-1000M-500M-500W General Specifications

  • Frequency Range: 500 MHz – 1000 MHz
  • Power Rating: 500 Watts CW
  • Prime Power: 28 VDC
  • RF Connections: J1 Common Antenna Port, N-F J2 Transmitter Port, N-F J3 Receiver Port, SMA-F
  • DC Connections: J4 9-Pin D sub

 

IFI Transmit Receive Switch Specifications

  • Operation Fequency: 500 – 1000 MHz
  • RF Power Handling: 500W CW into infinite load VSWR at all Phase angles.
  • Pulse Width: Up to CW
  • Duty Cycle: CW
  • Insertion Loss: 0.6 dB max.
  • Isolation: 50 dB min. all ports
  • Impedance: 50 Ohms nominal.
  • VSWR: 1.5:1 max. S11 all ports
  • VSWR Load Tolerance: 3:1 any phase angle @ full power 6:1 any phase angle for 10 msec
  • Switching Speed: 1.0 mSec max.
  • Switching Rate: 20 kHz max
  • Max Video Leakage: In Band: 0.5V Total: 3.5V
  • Video Leakage Duration: 250 nSec
  • Control Logic: Balanced differential TTL line. Impedance: 100 Ohms
  • Connectors: N-Female, Common Antenna Port N-Female, Transmitter Port SMA-F, Receiver Port
  • Power Supply: 28V @600mA
  • Operation Temperature: -20 to +70 degrees C
  • Non-Operation Temperature: -40 to +80 degrees C
  • Size: 6” x 5” x 2” approx.

Specifications above are at a case temperature of 25 degrees C.

Note: The Common port is DC grounded. There is built-in video filter at receiver port to minimize the leakage. The unit incorporates protection against lightning and high voltage spikes.

Click here for additional (TR) transmit receive switches...

Specfications are subject to change without noticification © IFI-2011

Transmit Receive Switch (TR switch), Model TRS-1000M-500M-1KW

 

500 MHz – 1000 MHz

1000 watts
Rated Power

Transmit - Receive Switch (TR switch) Features:

  • Instantaneous Frequency ranges
  • Rugged Construction
  • High Reliability
 

Transmit Receive Switch - Model TRS-1000M-500M-1KWInstruments For industry, is a supplier of state-of-the-art RF power amplifiers and accessories covering broadband frequencies for virtually limitless applications. IFI supports a variety of markets with a full line of advanced products. Many of our products are specifically designed for EMC, EW & ECM applications so we also provide our customers with a wide range of RF & Microwave accessories to compliment other applications. These products are available in a wide range of power levels from a few watts to hundreds of watts for narrow and broad band frequency ranges. IFI’s RF products are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Our Technology Innovations are critical in supporting and meeting customer requirements. Call us with your requirements!

 

Transmit Receive Switch Model: TRS-1000M-500M-1KW General Specifications

  • Frequency Range: 500 MHz – 1000 MHz
  • Power Rating: 1000 Watts CW
  • Prime Power: 28 VDC
  • RF Connections: J1 Common Antenna Port, SC-F J2 Transmitter Port, SC-F J3 Receiver Port, SMA-F
  • DC Connections: J4 9-Pin D sub

 

IFI Transmit Receive Switch Specifications

  • Operation Fequency: 500 – 1000 MHz
  • RF Power Handling: 1000W CW
  • Pulse Width: Up to CW
  • Duty Cycle: CW
  • Insertion Loss: 0.6 dB max.
  • Isolation: 50 dB min. all ports
  • Impedance: 50 Ohms nominal.
  • VSWR: 1.5:1 max. S11 all ports
  • VSWR Load Tolerance: 3:1 any phase angle @ full power 6:1 any phase angle for 10 msec
  • Switching Speed: 1.0 mSec max.
  • Switching Rate: 20 kHz max
  • Max Video Leakage: In Band: 0.5V Total: 3.5V
  • Video Leakage Duration: 250 nSec
  • Control Logic: Balanced differential TTL line. Impedance: 100 Ohms
  • Connectors: SC-Female, Common Antenna Port SC-Female, Transmitter Port SMA-F, Receiver Port
  • Power Supply: 28V @600mA
  • Operation Temperature: -20 to +70 degrees C
  • Non-Operation Temperature: -40 to +80 degrees C
  • Size: 6” x 5” x 2”

Specifications above are at a case temperature of 25 degrees C.

Note: The Common port is DC grounded. There is built-in video filter at receiver port to minimize the leakage. The unit incorporates protection against lightning and high voltage spikes.

Specfications are subject to change without noticification © IFI-2011

Transmit Receive Switch, Model TRS-520M-100M-500KW

 

100 MHz – 520 MHz

500 watts
Rated Power

Transmit - Receive Switch Features:

  • Instantaneous Frequency ranges
  • Rugged Construction
  • High Reliability
 

Transmit Receive Switch - Model TRS-520M-100M-500KWInstruments For industry, is a supplier of state-of-the-art RF power amplifiers and accessories covering broadband frequencies for virtually limitless applications. IFI supports a variety of markets with a full line of advanced products. Many of our products are specifically designed for EMC, EW & ECM applications so we also provide our customers with a wide range of RF & Microwave accessories to compliment other applications. These products are available in a wide range of power levels from a few watts to hundreds of watts for narrow and broad band frequency ranges. IFI’s RF products are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Our Technology Innovations are critical in supporting and meeting customer requirements. Call us with your requirements!

 

Transmit Receive Switch Model: TRS-520M-100M-500W General Specifications

  • Frequency Range: 100 – 520 MHz
  • Power Rating: 500 Watts CW
  • Prime Power: 28 VDC
  • RF Connections: J1 Common Antenna Port, N-F J2 Transmitter Port, N-F J3 Receiver Port, SMA-F
  • DC Connections: J4 9-Pin D sub

 

IFI Transmit Receive Switch Specifications

  • Operation Fequency: 100 – 520 MHz
  • RF Power Handling: 500W CW into infinite load VSWR at all Phase angles.
  • Pulse Width: Up to CW
  • Duty Cycle: CW
  • Insertion Loss: 0.5 dB max.
  • Isolation: 50 dB Transmitter Port: 60 dB min. Receiver port
  • Impedance: 50 Ohms nominal.
  • VSWR: 1.5:1 max. S11 all ports
  • VSWR Load Tolerance: 3:1 any phase angle @ full power,  6:1 any phase angle for 10 msec
  • Switching Speed: 2 mSec max.
  • Switching Rate: 20 kHz max
  • Max Video Leakage: In Band: 0.5V Total: 3.5V
  • Video Leakage Duration: 250 nSec
  • Control Logic: Balanced differential TTL line. Impedance: 100 Ohms
  • Connectors: N-Female, Common Antenna Port N-Female, Transmitter Port SMA-F, Receiver Port
  • Power Supply: 28V @ 600mA.
  • Operation Temperature: -20 to +70 degrees C
  • Non-Operation Temperature: -40 to +80 degrees C
  • Size: 7” x 5” x 3” approx.

Specifications above are at a case temperature of 25 degrees C.

Note: The Common port is DC grounded. There is built-in video filter at receiver port to minimize the leakage. The unit incorporates protection against lightning and high voltage spikes.

Specfications are subject to change without noticification © IFI-2011

Transmit Receive Switch (TR switch), Model TRS-1000M-500M-1.5KW

 

100 MHz – 500 MHz

1500 watts
Rated Power

Transmit - Receive (TR) Switch Features:

  • Instantaneous Frequency ranges
  • Rugged Construction
  • High Reliability
 

Transmit Receive Switch - Model TRS-1000M-500M-1.5KWInstruments For industry, is a supplier of state-of-the-art RF power amplifiers and accessories covering broadband frequencies for virtually limitless applications. IFI supports a variety of markets with a full line of advanced products. Many of our products are specifically designed for EMC, EW & ECM applications so we also provide our customers with a wide range of RF & Microwave accessories to compliment other applications. These products are available in a wide range of power levels from a few watts to hundreds of watts for narrow and broad band frequency ranges. IFI’s RF products are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Our Technology Innovations are critical in supporting and meeting customer requirements. Call us with your requirements!

 

RF Transmit Receive Switch (TR) Model: TRS-1000M-500M-1.5KW General Specifications

  • Frequency Range: 500 MHz – 1000 MHz
  • Power Rating: 1500 Watts CW
  • Prime Power: 12 VDC & -375 VDC
  • RF Connections: J1 Common Antenna Port, SC-F J2 Transmitter Port, SC-F J3 Receiver Port, SMA-F
  • DC Connections: J4 9-Pin D sub

 

IFI RF High Power Transmit Receive Switch (TR) Specifications

  • Operation Fequency: 500 – 1000 MHz
  • RF Power Handling: 1500W CW
  • Pulse Width: Up to CW
  • Duty Cycle: CW
  • Insertion Loss: 0.5 dB max.
  • Isolation: 50 dB Transmitter Port: 60 dB min. Receiver port
  • Impedance: 50 Ohms nominal.
  • VSWR: 1.5:1 max. S11 all ports
  • VSWR Load Tolerance: 3:1 any phase angle @ full power 6:1 any phase angle for 10 msec
  • Switching Speed: 50 microseconds max (25 usec typical)
  • Switching Rate: 10 kHz max
  • Max Video Leakage: In Band: 0.5V Total: 3.5V
  • Video Leakage Duration: 250 nSec
  • Control Logic: Balanced differential TTL line. Impedance: 100 Ohms
  • Connectors: SC-Female, Common Antenna Port SC-Female, Transmitter Port SMA-F, Receiver Port
  • Power Supply: +12V @ 600mA. & -375V @ <50mA
  • Operation Temperature: -20 to +70 degrees C
  • Non-Operation Temperature: -40 to +80 degrees C
  • Size: 4.5” x 4.4” x 2.3” approx.

Specifications above are at a case temperature of 25 degrees C.

Note: The Common port is DC grounded. There is built-in video filter at receiver port to minimize the leakage. The unit incorporates protection against lightning and high voltage spikes.

Specfications are subject to change without noticification © IFI-2011

Transmit Receive Switch, Model TRS-520M-100M-1KW

 

100 MHz – 520 MHz

1000 watts
Rated Power

Transmit - Receive Switch Features:

  • Instantaneous Frequency ranges
  • Rugged Construction
  • High Reliability
 

Transmit Receive Switch - Model TRS-520M-100M-500KWInstruments For industry, is a supplier of state-of-the-art RF power amplifiers and accessories covering broadband frequencies for virtually limitless applications. IFI supports a variety of markets with a full line of advanced products. Many of our products are specifically designed for EMC, EW & ECM applications so we also provide our customers with a wide range of RF & Microwave accessories to compliment other applications. These products are available in a wide range of power levels from a few watts to hundreds of watts for narrow and broad band frequency ranges. IFI’s RF products are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Our Technology Innovations are critical in supporting and meeting customer requirements. Call us with your requirements!

 

Transmit Receive Switch Model: TRS-520M-100M-1KW General Specifications

  • Frequency Range: 100 – 520 MHz
  • Power Rating: 1000 Watts CW
  • Prime Power: 28 VDC
  • RF Connections: J1 Common Antenna Port, SC-F J2 Transmitter Port, SC-F J3 Receiver Port, SMA-F
  • DC Connections: J4 9-Pin D sub

 

IFI Transmit Receive Switch Specifications

  • Operation Fequency: 100 – 520 MHz
  • RF Power Handling: 1000W CW
  • Pulse Width: Up to CW
  • Duty Cycle: CW
  • Insertion Loss: 0.5 dB max.
  • Isolation: 50 dB Transmitter Port: 60 dB min. Receiver port
  • Impedance: 50 Ohms nominal.
  • VSWR: 1.5:1 max. S11 all ports
  • VSWR Load Tolerance: 3:1 any phase angle @ full power 6:1 any phase angle for 10 msec
  • Switching Speed: 2 mSec max.
  • Switching Rate: 20 kHz max
  • Max Video Leakage: In Band: 0.5V Total: 3.5V
  • Video Leakage Duration: 250 nSec
  • Control Logic: Balanced differential TTL line. Impedance: 100 Ohms
  • Connectors: SC-Female, Common Antenna Port SC-Female, Transmitter Port SMA-F, Receiver Port
  • Power Supply: 28V @ 600mA.
  • Operation Temperature: -20 to +70 degrees C
  • Non-Operation Temperature: -40 to +80 degrees C
  • Size: 7” x 5” x 3” approx.

Specifications above are at a case temperature of 25 degrees C.

Note: The Common port is DC grounded. There is built-in video filter at receiver port to minimize the leakage. The unit incorporates protection against lightning and high voltage spikes.

Specfications are subject to change without noticification © IFI-2011

Instruments For Industry

903 South Second Street • Ronkonkoma, NY
(631) 467-8400 • Fax: (631) 467-8558 
© 2008 All rights reserved