30 – 220 MHz

10 – 5000 watts
Minimum Rated Power
"Class A" RF Power Amplifier

Amplifier Features:

  • Solid State Design
  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged construction & High Reliability
  • Integrated Force Air Cooling
  • Backlit Screen
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote
 

Solid State Amplifier - SXXE SeriesInstruments for Industry, SXXE-Series RF Power Amplifiers provide outstanding RF performance. These microwave amplifier products are available in a wide range of power levels from 10 watts to 5000 watts in the 30 – 220 MHz frequency range. These state-of-the-art solid-state power RF microwave power amplifiers are specifically designed for laboratory and all testing applications.

IFI RF microwave amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Sixth generation LDMOS Transistors provide reliable brute-power performance at frequencies up to 220 MHz.

Our RF power amplifiers feature heavy-duty individually shielded aluminum housings at the module level. This concept of a shielded modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

From the ground up, the “SXXE-SERIES” products are structurally engineered to withstand operation in mechanically hostile environments. Ruggedized versions are available for applications that will be exposed to very harsh environments.

Solid-State RF
Power Amplifier
Model
Frequency Range
(MHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
kVA Weight
(lbs.)
Size (Inches)
(W x D x H)
SXXE10 30 – 220 10 10 40 0.1 25 19 x 24 x 5.25
SXXE25 30 – 220 25 25 44 0.2 28 19 x 24 x 5.25
SXXE50 30 – 220 50 50 47 0.4 32 19 x 24 x 5.25
SXXE100 30 – 220 100 80 50 0.5 36 19 x 25 x 7.0
SXXE150 30 – 220 150 120 52 0.8 40 19 x 25 x 7.0
SXXE200 30 – 220 200 150 53 1.4 50 19 x 25 x 7.0
SXXE250 30 – 220 250 200 54 1.6 60 19 x 25 x 7.0
SXXE350 30 – 220 350 250 56 3 80 19 x 24 x 8.75
SXXE500 30 – 220 500 350 57 4 100 19 x 25x 8.75
SXXE1000 30 – 220 1000 800 60 8 150 19 x 25 x 10.5
SXXE2000 30 – 220 2000 1600 63 15 200 (2X) 19 x 25.0 x 14
SXXE3000 30 – 220 3000 2500 65 20 500 Rack Integrated
SXXE5000 30 – 220 5000 4500 67 30 1000 Rack Integrated

 

Standard Features for IFI SXXE-Series Solid-State Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 and RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local and Remote, 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics and Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI SXXE-Series Solid-State Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female up to 1KW amps, SC or 7/16 available, 7/16 2KW/3KW/4KW amps. Other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    100/110/115/120 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI SXXE-Series Solid-State Amplifiers

  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis slides for a 19" rack mounting
  • Option 118A: RF Input On Front Output On Rear
  • Option 118B: RF Input On Rear Output On Front

 

Instruments For Industry

903 South Second Street • Ronkonkoma, NY
(631) 467-8400 • Fax: (631) 467-8558 
© 2008 All rights reserved