Solid State RF Microwave Power Amplifiers- ME-Series
10kHz - 250MHz
10 - 200 watts
Minimum Rated Power
"Class A" RF Power Amplifier
Solid State Amplifier Features:
- Solid State LDMOS Designs
- Instantaneous Broadband Frequency range
- Modular Design Construction
- Rugged construction & High Reliability
- Integrated Force Air Cooling
|
 Instruments for Industry, ME-series Solid State RF Microwave Broadband Amplifiers provide outstanding RF performance. Our “ME-Series” products are state-of-the-art solid-state power amplifiers specifically designed for laboratory and all testing applications. These products are available in a wide range of power levels from 10 watts to 200 watts in the 10 kHz - 250 MHz frequency range.
IFI RF amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Sixth generation LDMOS Transistors provide reliable brute-power performance at frequencies up to 250 MHz.
Our RF power amplifiers feature individually shielded assemblies for the module level. This concept of shielded modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.
From the ground up, the “ME-SERIES” products are structurally engineered to withstand operation in mechanically hostile environments. Ruggedized versions are available for applications that will be exposed to very harsh environments.
|
| Model Number |
Frequency Range
(MHz) |
Rated Power
(watts min.) |
P1dB Power
(watts min.) |
Gain
(dB min.) |
Mains
(kVA) |
Weight
(lbs.) |
Size (Inches)
(W x D x H) |
| ME10* |
10kHz–250 MHz |
10 |
10 |
40 |
0.2 |
22 |
19 x 19.5 x 5.25 |
| ME25* |
10kHz–250 MHz |
25 |
25 |
44 |
0.3 |
24 |
19 x 19.5 x 5.25 |
| ME50* |
10kHz–250 MHz |
50 |
50 |
47 |
0.5 |
25 |
19 x 19.5 x 5.25 |
| ME75* |
10kHz–250 MHz |
75 |
75 |
48 |
0.8 |
27 |
19 x 19.5 x 5.25 |
| ME100* |
10kHz–250 MHz |
100 |
80 |
50 |
1 |
35 |
19 x 19.5 x 5.25 |
| ME150* |
10kHz–250 MHz |
150 |
100 |
52 |
1.5 |
40 |
19 x 19.5 x 5.25 |
| ME200* |
10kHz–250 MHz |
200 |
150 |
53 |
2 |
88 |
19 x 27.0 x 14.0 |
*These models have no front panel display and no GPIB interface
Standard Features for IFI ME-Series Solid State Amplifiers
- VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
- * Alternate Prime Power (specify at time of order)
- Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
- Gain Control Local, 15dB range
- RF Input/Output Connectors on the Front Panel, 118R for rear panel
IFI ME-Series Solid State Amplifier Specifications
- Input/output Impedance: 50 ohms
- RF Input/ Sample Connectors: Type N Female, unless specified otherwise
- RF Output Connector: Type N Female. Other connectors available by request or specification
- Input VSWR: 2.0:1
- Output VSWR: 2.5:1, with full power
- Operating Temp: 0º to 50º C
- Non-operating Temp: -40º to 70º C (50,000 feet max)
- Humidity: 95% without condensation
- Altitude: 10,000 feet
- Cooling System: Air cooled, self contained
- Modulation: AM, FM, Pulse
- Configuration: Rack Mount as specified in Model Table
- Spurious Outputs: <-60 dBc nominal
- Harmonics: -20dBc minimum @ Linear Power
- Standard Prime Powers:
100, 110, 115, 120 VAC ±10% 50/60 Hz, single phase
200, 220, 230, 240VAC ±10% 50/60 Hz, single phase
- Special Prime Powers other then listed are subject to availability
Some Available Options for IFI ME-Series Solid State Amplifiers
- Option 112F: RF Sample Port on the Front Panel, 112R for rear panel
- Option 113: Chassis slides for a 19" rack mounting
- Option 118A: RF Input On Front Output On Rear
- Option 118B: RF Input On Rear Output On Front
- Option 128: RF Saftey Interlock
Return to Solid State Amplifier Index
Specfications are subject to change without noticification © IFI-2011
|
|
|
Amplifiers 
