|
RF Solid State Power Amplifier, SXXL-Series SSPA |
1.5 - 30 MHz
10-5000 watts
Minimum Rated Power
"Class A" RF Power Amplifier
Solid Stae Rf Power Amplifier Features:
- Solid State Design
- Instantaneous Broadband Frequency range
- Modular Design Construction
- Rugged construction & High Reliability
- Integrated Force Air Cooling
- Backlit Screen
- Self-diagnostic circuitry
- IEEE-488 interface & RS232 Remote
|
 Instruments for Industry, SXXL-Series solid state amplifiers provide outstanding RF performance. These SSPA products are available in a wide range of power levels from 10 watts to 5000 watts in the 1.5 – 30.0MHz frequency range. These state-of-the-art solid-state power amplifiers are specifically designed for laboratory and all testing applications.
IFI RF solid-state amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Sixth generation LDMOS Transistors provide reliable brute-power performance at frequencies up to 30MHz.
Our RF SSPA's feature heavy-duty individually shielded aluminum housings at the module level. This concept of a shielded modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.
From the ground up, the “SXXL-SERIES” products are structurally engineered to withstand operation in mechanically hostile environments. Ruggedized versions are available for applications that will be exposed to very harsh environments.
|
Solid-State
Amplifier
Model Number |
Frequency Range
(MHz) |
Rated Power
(watts min.) |
P1dB Power
(watts min.) |
Gain
(dB min.) |
kVA |
Weight
(lbs.) |
Size (Inches)
(W x D x H) |
| SXXL10 |
1.5 – 30
|
10 |
10 |
40 |
0.1 |
25 |
19 x 24 x 5.25 |
| SXXL25 |
1.5 – 30 |
25 |
25 |
44 |
0.2 |
28 |
19 x 24 x 5.25 |
| SXXL50 |
1.5 – 30 |
50 |
50 |
47 |
0.4 |
32 |
19 x 24 x 5.25 |
| SXXL100 |
1.5 – 30 |
100 |
80 |
50 |
0.5 |
36 |
19 x 25 x 7.0 |
| SXXL150 |
1.5 – 30 |
150 |
120 |
52 |
0.8 |
40 |
19 x 25 x 7.0 |
| SXXL200 |
1.5 – 30 |
200 |
150 |
53 |
1.4 |
50 |
19 x 25 x 7.0 |
| SXXL250 |
1.5 – 30 |
250 |
200 |
54 |
1.6 |
60 |
19 x 25 x 7.0 |
| SXXL350 |
1.5 – 30 |
350 |
250 |
56 |
3 |
80 |
19 x 24x 8.75 |
| SXXL500 |
1.5 – 30 |
500 |
350 |
57 |
4 |
100 |
19 x 24x 8.75 |
| SXXL1000 |
1.5 – 30 |
1000 |
800 |
60 |
8 |
150 |
19 x 25.25 x 10.5
|
| SXXL2000 |
1.5 – 30 |
2000 |
1600 |
63 |
15 |
200 |
(2X) 19 x 25.0 x 14 |
| SXXL3000 |
1.5 – 30 |
3000 |
2500 |
65 |
20 |
500 |
Rack Integrated
|
| SXXL5000 |
1.5 – 30 |
5000 |
4500 |
67 |
30 |
1000 |
Rack Integrated
|
Standard Features for IFI SXXL-Series Solid State Amplifiers
- VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
- * Alternate Prime Power (specify at time of order)
- GPIB IEEE 488 and RS232 Remote Control
- RF Sample Port on the Front Panel, 112R for rear panel
- Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
- Gain Control Local and Remote, 30dB range
- RF Input/Output Connectors on the Front Panel, 118R for rear panel
- Internal Systems Diagnostics and Status Indicators
- Total/Operate Elapsed Time Metering in hours
- RF Safety Interlock
- Forward/Reflected Power Indication simultaneously on Front Panel display
IFI SXXL-Series SSPA Specifications
- Input/output Impedance: 50 ohms
- RF Input/ Sample Connectors: Type N Female, unless specified otherwise
- RF Input/ Sample Connectors: Type N Female, unless specified otherwise
- RF Output Connector: Type N Female up to 1KW amps, SC or 7/16 available, 7/16 2KW/3KW/4KW amps. Other connectors available by request or specification
- Input VSWR: 2.0:1
- Output VSWR: 2.5:1
- Operating Temp: 0º to 50º C
- Non-operating Temp: -40º to 70º C (50,000 feet max)
- Humidity: 95% without condensation
- Altitude: 10,000 feet
- Cooling System: Air cooled, self contained
- Modulation: AM, FM, Pulse
- Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
- Spurious Outputs: <-60 dBc nominal
- Harmonics: -20dBc minimum @ Linear Power
- Standard Prime Powers:
100, 115, 120 VAC ±10% 50/60 Hz, single phase
220, 230, 240VAC ±10% 50/60 Hz, single phase
100/110/115/120 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
200/220/230/240VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
- Special Prime Powers other then listed are subject to availability
Some Available Options for IFI SXXL-Series SSSPA's
- Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
- Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
- Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
- Option 113: Chassis slides for a 19" rack mounting
- Option 118A: RF Input On Front Output On Rear
- Option 118B: RF Input On Rear Output On Front
|
|
|
Amplifiers 
