|
TCCX Series Tetrode Tube Amplifiers |
10kHz - 220MHz
500 - 12000 watts
Minimum Rated Power
RF Amplifier
Tetrode Tube Amplifier Features:
- Instantaneous Broadband Frequency range
- Modular Design Construction
- Rugged construction & High Reliability
- Modular Design Construction
- Backlit LCD Display
- Integrated Force Air Cooling
- Self-diagnostic circuitry
- IEEE-488 Interface, RS232 & Ethernet
- Tetrode Tube Design
- Solid State Power Supply
|
 Instruments for Industry, TCCX-Series Tetrode Tube Amplifiers provide outstanding RF performance. Our “TCCX-Series” products are a mature design but incorporate the latest features with respect to control and monitoring. These tetrode tube amplifiers have field proven reliability and unsurpassed performance as best of the breed. They were specifically designed for laboratory testing applications into the worst mismatch conditions. These products are available in a wide range of power levels from 500 watts to 12000 watts in the 10KHz-220MHz frequency range.
IFI Tetrode Tube amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. The Amplifier system integrates a Solid State Power supply to provide reliable brute-power performance at frequencies up to 220MHz.
Our RF power amplifiers feature modular heavy duty construction. This concept of modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.
From the ground up, the “TCCX-SERIES” tetrode tube amplifier products are structurally engineered to withstand operation into complete mismatch conditions without folding back. A product and design built to last!
|
| Model Number |
Frequency Range
(MHz) |
Rated Power
(watts min.) |
P1dB Power
(watts min.) |
Gain
(dB min.) |
Mains
(kVA) |
Weight
(lbs.) |
Size (Inches)
(W x D x H) |
| TCCX500 |
10 kHz – 220 MHz |
500 |
400 |
57 |
4.0 |
22 |
Rack Integrated
|
| TCCX1000 |
10 kHz – 220 MHz |
1000 |
800 |
60 |
8.0 |
24 |
Rack Integrated |
| TCCX2000 |
10 kHz – 200 MHz |
2000 |
1500 |
63 |
15.0 |
25 |
Rack Integrated |
| TCCX2200 |
10 kHz – 200 MHz |
2200 |
1600 |
64 |
16.0 |
27 |
Rack Integrated |
| TCCX2500 |
10 kHz – 200 MHz |
2500 |
1800 |
64 |
20.0 |
35 |
Rack Integrated |
| TCCX3500 |
10 kHz – 100 MHz |
3500 |
2000 |
66 |
25.0 |
40 |
Rack Integrated |
|
Pulse
Model Number
|
|
Rated
Pulse
Power
|
Rated
CW
Power
|
|
|
|
|
|
| TCCX500P |
10 kHz – 220 MHz |
1500 |
500 |
400 |
57 |
4.0 |
600 |
Rack Integrated |
| TCCX1000P |
10 kHz – 220 MHz |
3000 |
1000 |
800 |
60 |
8.0 |
750 |
Rack Integrated |
| TCCX2000P |
10 kHz – 200 MHz |
6000 |
2000 |
1500 |
63 |
15.0 |
1000 |
Rack Integrated |
| TCCX2200P |
10 kHz – 200 MHz |
6500 |
2200 |
1600 |
64 |
16.0 |
1200 |
Rack Integrated |
| TCCX2200ULP |
10 kHz – 200 MHz |
12000 |
2200 |
1600 |
64 |
16.0 |
1600 |
Rack Integrated |
| TCCX2500P |
10 kHz – 100 MHz |
7500 |
2500 |
1800 |
64 |
20.0 |
1250 |
Rack Integrated |
Standard Features for IFI TCCX Series Tetrode Tube Amplifiers
- VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
- * Alternate Prime Power (specify at time of order)
- GPIB IEEE 488 & RS232 Remote Control
- RF Sample Port on the Front Panel, 112R for rear panel
- Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
- Gain Control Local & Remote
- RF Input/Output Connectors on the Front Panel, 118R for rear panel
- Internal Systems Diagnostics & Status Indicators
- Total/Operate Elapsed Time Metering in hours
- RF Safety Interlock
- Forward/Reflected Power Indication simultaneously on Front Panel display
IFI TCCX Series Tetrode Tube Amplifier Specifications
- Input/output Impedance: 50 ohms
- RF Input/ Sample Connectors: Type N Female, unless specified otherwise
- RF Output Connector: Type N Female up to 1KW amps, SC or 7/16 available, Other connectors available by request or specification
- Input VSWR: 2.0:1
- Output VSWR: 2.5:1, with full power
- Operating Temp: 0º to 50º C
- Non-operating Temp: -40º to 70º C (50,000 feet max)
- Humidity: 95% without condensation
- Altitude: 10,000 feet
- Cooling System: Air cooled, self contained
- Modulation: AM, FM, Pulse
- Configuration: Rack/ Cabinet Integrated
- Spurious Outputs: <-60 dBc nominal
- Harmonics: -20dBc minimum @ Linear Power
- Standard Prime Powers:
120/208 ±10% 50/60 Hz, three phase Wye or Delta power is available
200/220/230/240VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
- Special Prime Powers other then listed are subject to availability
Some Available Options for IFI TCCX Series Tetrode Tube Amplifiers
- Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
- Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
- Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
- Option 118A: RF Input On Front Output On Rear
- Option 118B: RF Input On Rear Output On Front
|
|
|
Amplifiers 
