Solid State Amplifiers

Solid state RF microwave amplifier products.

S188 Series Solid State Microwave Power Amplifiers

 

8.0 – 18.0 GHz

5 – 125 watts

Amplifier Features:

  • Solid State Design
  • Rugged construction & High Reliability
  • Instantaneous Broadband Frequency range
  • Backlit screen
  • Modular Design Construction
  • Integrated Force Air Cooling
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote
 

Solid State Amplifier - S188 SeriesInstruments for Industry, S188 Series Solid State amplifiers are state-of-the-art amplifiers and provide outstanding RF performance. The S188 Series amplifiers operate over the frequency range from 8.0 – 18.0 GHz and can be supplied at power levels from 5 watts to 125 watts offering all the control and communication features needed for today’s automated test systems. From the ground up, the S188 Series amplifiers are built to withstand rugged handling, whether it's being shipped to you or hauled around from site to site. They feature heavy-duty aluminum chassis construction with a modular approach for easy access and service.

IOperation safety and ease of use are paramount in IFI product designs. The IFI S188 Series include a full complement of RF and hardware protection circuits including high VSWR, over-current, voltage protection, redundant thermal and airflow sensors for the module and the system level. In addition, the S188 series includes a state-of-the-art interface that is sophisticated, comprehensive, and yet simple to use.

The backlit LCD screen shows forward/reverse power indication, system status and self-diagnostic information. All the amplifiers operating parameters are simultaneously available in the amplifier front panel display as well as over the remote bus. Selection switches allow you to switch the amplifier to the desired mode of operation for local control if the unit is not being operated remotely.

For computer automation both an RS-232 and IEEE interface are provided as standard. To meet individual application needs, the S188 Series amplifiers can be easily customized with other options. With this capability and its reliable elegant design, the S188 series amplifiers are the perfect system for your applications.

Model Number Frequency Range
(GHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
Mains
(kVA)
Weight
(lbs.)
Size (Inches)
(W x D x H)
S188-5 8.0 – 18.0 5 5 37 0.1 25 19 x 24 x 5.25
S188-10 8.0 – 18.0 10 8 40 0.1 28 19 x 24 x 5.25
S188-20 8.0 – 18.0 20 15 43 0.2 32 19 x 24 x 5.25
S188-25 8.0 – 18.0 25 18 44 0.25 36 19 x 24 x 7.00
S188-40 8.0 – 18.0 40 30 46 0.3 40 19 x 24 x 8.75
S188-50 8.0 – 18.0 50 35 47 0.4 50 19 x 25 x 10.5
S188-75 8.0 – 18.0 75 60 49 0.6 55 (2X)19 x 25 x 10.5
S188-100 8.0 – 18.0 100 70 50 0.8 60 (2X)19 x 25 x 10.5
S188-125 8.0 – 18.0 125 75 52 1.2 80 (2X)19 x 25 x 10.5

 

Standard Features for IFI S188 Series Solid State Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 & RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local, 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics & Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI S188 Series Solid State Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female. Other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    120/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI S188 Series Solid State Amplifiers

  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis slides for a 19" rack mounting
  • Option 118A: RF Input On Front Output On Reark
  • Option 118B: RF Input On Rear Output On Front

 

S186 Series Solid State Microwave Power Amplifiers

 

6.0 – 18.0 GHz

5 – 125 watts

Amplifier Features:

  • Solid State Design
  • Rugged construction & High Reliability
  • Instantaneous Broadband Frequency range
  • Backlit screen
  • Modular Design Construction
  • Integrated Force Air Cooling
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote
 

Solid State Amplifier - S186 SeriesInstruments for Industry, S186 Series Solid State amplifiers are state-of-the-art amplifiers and provide outstanding RF performance. The S186 Series amplifiers operate over the frequency range from 6.0 – 18.0 GHz and can be supplied at power levels from 5 watts to 125 watts offering all the control and communication features needed for today’s automated test systems. From the ground up, the S186 Series amplifiers are built to withstand rugged handling, whether it's being shipped to you or hauled around from site to site. They feature heavy-duty aluminum chassis construction with a modular approach for easy access and service.

Operation safety and ease of use are paramount in IFI product designs. The IFI S186 Series include a full complement of RF and hardware protection circuits including high VSWR, over-current, voltage protection, redundant thermal and airflow sensors for the module and the system level. In addition, the S186 series includes a state-of-the-art interface that is sophisticated, comprehensive, and yet simple to use.

The backlit LCD screen shows forward/reverse power indication, system status and self-diagnostic information. All the amplifiers operating parameters are simultaneously available in the amplifier front panel display as well as over the remote bus. Selection switches allow you to switch the amplifier to the desired mode of operation for local control if the unit is not being operated remotely.

For computer automation both an RS-232 and IEEE interface are provided as standard. To meet individual application needs, the S186 Series amplifiers can be easily customized with other options. With this capability and its reliable elegant design, the S186 series amplifiers are the perfect system for your applications.

Model Number Frequency Range
(GHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
Mains
(kVA)
Weight
(lbs.)
Size (Inches)
(W x D x H)
S186-5 6.0 – 18.0 5 5 37 0.1 25 19 x 24 x 5.25
S186-10 6.0 – 18.0 8 8 40 0.1 28 19 x 24 x 5.25
S186-20 6.0 – 18.0 15 15 43 0.2 32 19 x 24 x 5.25
S186-25 6.0 – 18.0 18 18 44 0.25 36 19 x 24 x 7.00
S186-40 6.0 – 18.0 30 30 46 0.3 40 19 x 24 x 8.75
S186-50 6.0 – 18.0 35 35 47 0.4 50 19 x 25 x 10.5
S186-75 6.0 – 18.0 75 60 49 0.6 55 (2X) 19 x 25 x 10.5
S186-100 6.0 – 18.0 100 70 50 0.8 60 (2X) 19 x 25 x 10.5
S186-125 6.0 – 18.0 125 75 52 1.2 80 (2X) 19 x 25 x 10.5

 

Standard Features for IFI S186 Series Solid State Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 & RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local and Remote 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics & Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI S186 Series Solid State Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female. Other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1, with full power
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    120/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI ML-Series Solid State Amplifiers

  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis slides for a 19" rack mounting
  • Option 118A: RF Input On Front Output On Rear
  • Option 118B: RF Input On Rear Output On Front

 

SMXE-2G Series, Solid State Amplifiers

 

10 kHz – 2 GHz

10 – 200 watts
Minimum Rated Power

Amplifier Features:

  • Solid State Design
  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged construction & High Reliability
  • Integrated Force Air Cooling
  • Backlit Screen
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote
 

Solid State Amplifier - SMXE-2G SeriesInstruments for Industry, SMXE-2G Series Amplifiers provide outstanding RF performance. These products are available in a wide range of power levels from 10 watts to 200 watts in the 10 kHz – 2.0 GHz frequency range. These state-of-the-art solid-state power amplifiers are specifically designed for laboratory and all testing applications.

IFI RF amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Sixth generation LDMOS and GAN Transistors provide reliable brute-power performance at frequencies up to 2.0 GHz.

Our RF power amplifiers feature individually shielded aluminum assemblies for the module level. This concept of a shielded modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

From the ground up, the “SMXE-2G SERIES” products are structurally engineered to withstand operation in mechanically hostile environments. Ruggedized versions are available for applications that will be exposed to very harsh environments.

Model Number Frequency Range
(MHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
kVA Weight
(lbs.)
Size (Inches)
(W x D x H)
SMXE-2G-10 .01 – 2000 10 10 40 0.1 35 19 x 24 x 7.0
SMXE-2G-25 .01 – 2000 25 25 44 0.2 40 19 x 24 x 7.0
SMXE-2G-50 .01 – 2000 50 50 47 0.4 75 19 x 24 x 7.0
SMXE-2G-100 .01 – 2000 100 80 50 0.5 80 19 x 25.12 x 10.5
SMXE-2G-150 .01 – 2000 150 120 52 0.8 120 19 x 25.12 x 10.5
SMXE-2G-200 .01 – 2000 200 150 53 1.5 150 (2X) 19 x 25.12 x 10.5

 

Standard Features for IFI SMXE-2G Series Solid State Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 and RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local and Remote, 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics and Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI SMXE-2G-Series Solid State Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female. Other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    100/110/115/120 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI SMXG-2E-Series Solid State Amplifiers

  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis slides for a 19" rack mounting
  • Option 118A: RF Input On Front Output On Rear
  • Option 118B: RF Input On Rear Output On Front

 

S181 Series Solid State Microwave Power Amplifiers

 

0.8 – 18.0 GHz

5 – 50 watts

Amplifier Features:

  • Solid State Design
  • Rugged Construction & High Reliability
  • Instantaneous Broadband Frequency range
  • Backlit screen
  • Modular Design Construction
  • Integrated Force Air Cooling
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote
 

Solid State Amplifier - S181 SeriesInstruments for Industry, S181 Series Solid State amplifiers are state-of-the-art amplifiers and provide outstanding RF performance. The S181 Series amplifiers operate over the frequency range from 8.0 – 18.0 GHz in various bands and can be supplied at power levels from 5 watts to 50 watts offering all the control and communication features needed for today’s automated test systems. From the ground up, the S181 Series amplifiers are built to withstand rugged handling, whether it's being shipped to you or hauled around from site to site. They feature heavy-duty aluminum chassis construction with a modular approach for easy access and service.

Operation safety and ease of use are paramount in IFI product designs. The IFI S181 Series include a full complement of RF and hardware protection circuits including high VSWR, over-current, voltage protection, redundant thermal and airflow sensors for the module and the system level. In addition, the S181 series includes a state-of-the-art interface that is sophisticated, comprehensive, and yet simple to use.

The backlit LCD screen shows forward/reverse power indication, system status and self-diagnostic information. All the amplifiers operating parameters are simultaneously available in the amplifier front panel display as well as over the remote bus. Selection switches allow you to switch the amplifier to the desired mode of operation for local control if the unit is not being operated remotely.

For computer automation both an RS-232 and IEEE interface are provided as standard. To meet individual application needs, the S181 Series amplifiers can be easily customized with other options. With this capability and its reliable elegant design, the S181 series amplifiers are the perfect system for your applications.

Model Number Frequency Range
(GHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
Mains
(kVA)
Weight
(lbs.)
Size (Inches)
(W x D x H)
S181-5 0.8 – 18.0 5 5 37 0.1 40 19 x 24 x 5.25
S181-10 0.8 – 18.0 10 8 40 0.1 45 19 x 24 x7.00
S181-20 0.8 – 18.0 20 12 43 0.2 50 19 x 24 x 8.75
S181-25 0.8 – 18.0 25 15 44 0.25 75 19 x 25 x 10.5
S181-30 0.8 – 18.0 30 20 45 0.3 80 19 x 25 x 10.5
S181-40 0.8 – 18.0 40 25 46 0.5 110 19 x 25 x 10.5
S181-50 0.8 – 18.0 50 30 47 0.6 120 19 x 25 x 10.5

 

 

Standard Features for IFI S181 Series Solid State Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 and RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local and Remote, 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics and Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI S181 Series Solid State Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female, Other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    120/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI S181 Series Solid State Amplifiers

  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3 GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis slides for a 19" rack mounting
  • Option 118A: RF Input On Front Output On Rear
  • Option 118B: RF Input On Rear Output On Front

 

Solid-State Power Amplifiers (SSPA): 

SCDX-Series RF Microwave Broad-Band Solid-State Power Amplifier

10 kHz – 400 MHz

10 – 1200 watts
Minimum Rated Power
RF Power Amplifier

Amplifier Features:

  • Solid State Design
  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged construction & High Reliability
  • Integrated Force Air Cooling
  • Backlit Screen
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote
 

Solid State Amplifier - SCDX SeriesInstruments for Industry, SCDX-Series Solid-State Power Amplifiers provide outstanding RF performance. These RF Microwave Broadband Amplifiers (SSPA's) are available in a wide range of power levels, from 10 watts to 500 watts in the 10 kHz – 400 MHz frequency range. These state-of-the-art solid-state power amplifiers are specifically designed for laboratory and all testing applications.

IFI Broad-Band RF Microwave Power Amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Sixth generation LDMOS Transistors provide reliable brute-power performance at frequencies up to 400 MHz.

Our RF Power Amps. feature individually shielded solid-state aluminum assemblies for the module level. This concept of a shielded modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities. From the ground up, the “SCDX-SERIES” products are structurally engineered to withstand operation in mechanically hostile environments. Ruggedized versions are available for applications that will be exposed to very harsh environments.

Solid-State Amplifier
Model Number
Frequency Range
(kHz – MHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
kVA Weight
(lbs.)
Size (Inches)
(W x D x H)
SCDX10 10 kHz – 400 MHz 10 10 40 0.1 40 19 x 24 x 5.25
SCDX25 10 kHz – 400 MHz 25 25 44 0.2 45 19 x 24 x 5.25
SCDX50 10 kHz – 400 MHz 50 50 47 0.4 50 19 x 24 x 5.25
SCDX100 10 kHz – 400 MHz 100 80 50 0.5 60 19 x 24 x 5.25
SCDX150 10 kHz – 400 MHz 150 100 52 0.8 70 19 x 24 x 7
SCDX200 10 kHz – 400 MHz 200 160 53 1.5 120 19 x 27 x 14
SCDX250 10 kHz – 400 MHz 250 200 54 2 160 (2X) 19 x 27 x 10.5
SCDX350 10 kHz – 400 MHz 350 280 56 2.5 180 (2X) 19 x 27 x 10.5
SCDX500 10 kHz – 400 MHz 500 300 57 3 200 (2X) 19 x 27 x 10.5

 

Standard Features for IFI SCDX-Series Solid State RF Power Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 and RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local and Remote, 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics and Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI SCDX-Series Solid State RF Power Amplifier (SSPA) Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female. Other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    100/110/115/120 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI SCDX-Series Solid State RF Power Amplifiers

  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis slides for a 19" rack mounting
  • Option 118A: RF Input On Front Output On Rear
  • Option 118B: RF Input On Rear Output On Front

 

Instruments For Industry

903 South Second Street • Ronkonkoma, NY
(631) 467-8400 • Fax: (631) 467-8558 
© 2008 All rights reserved