Solid state RF microwave amplifier products.

S61 Series, Solid State Microwave Power Amplifier

 

1 – 6 GHz

5 – 250 watts

Amplifier Features:

  • Solid State Design
  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged construction & High Reliability
  • Integrated Force Air Cooling
  • Backlit Screen
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote
 

Solid State Amplifier - S61 SeriesInstruments for Industry, S61 Series Solid State amplifiers are state-of-the-art amplifiers and provide outstanding RF performance. The S61 Series amplifiers operate over the frequency range from 1.0 – 6.0 GHz and can be supplied at power levels from 5 watts to 250 watts offering all the control and communication features needed for today’s automated test systems. From the ground up, the S61 Series amplifiers are built to withstand rugged handling, whether it's being shipped to you or hauled around from site to site. They feature heavy-duty aluminum chassis construction with a modular approach for easy access and service.

Operation safety and ease of use are paramount in IFI product designs. The IFI S61 Series include a full complement of RF and hardware protection circuits including high VSWR, over-current, voltage protection, redundant thermal and airflow sensors for the module and the system level. In addition, the S61 series includes a state-of-the-art interface that is sophisticated, comprehensive, and yet simple to use.

The backlit LCD screen shows forward/reverse power indication, system status and self-diagnostic information. All the amplifiers operating parameters are simultaneously available in the amplifier front panel display as well as over the remote bus. Selection switches allow you to switch the amplifier to the desired mode of operation for local control if the unit is not being operated remotely.

For computer automation both an RS-232 and IEEE interface are provided as standard. To meet individual application needs, the S61 Series amplifiers can be easily customized with other options. With this capability and its reliable elegant design, the S61 series amplifiers are the perfect system for your applications.

This solid state amplifier series utilizes GaN amplifier (Gallium Nitride Amplifier) technology.

Model Number Frequency Range
(GHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
kVA Weight
(lbs.)
Size (Inches)
(W x D x H)
S61-5 1 – 6 5 5 37 0.1 40 19 x 24 x 5.25
S61-10 1 – 6 10 8 40 0.1 45 19 x 24 x 5.25
S61-20 1 – 6 20 15 43 0.2 50 19 x 24 x 7
S61-25 1 – 6 25 20 44 0.25 60 19 x 24 x 7
S61-40 1 – 6 40 30 46 0.3 75 19 x 24 x 8.75
S61-50 1 – 6 50 40 47 0.4 90 19 x 25 x 10.5
S61-75 1 – 6 75 60 49 0.6 100 19 x 25 x 10.5
S61-100 1 – 6 100 80 50 0.8 180 (2X) 19 x 25 x 10.5
S61-150 1 – 6 150 130 52 1.2 200 (2X) 19 x 25 x 10.5
S61-200 1 – 6 200 150 53 1.5 400 Rack Integrated
S61-250 1 – 6 250 200 54 2 450 Rack Integrated

 

Standard Features for IFI S61-Series Solid State Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 and RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local and Remote, 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics and Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI S61-Series Solid State Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female, unless specified otherwise
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet maximum)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    120/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI S61-Series Solid State Amplifiers

  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis slides for a 19" rack mounting
  • Option 118A: RF Input On Front Output On Rear
  • Option 118B: RF Input On Rear Output On Front

 

S42 Series, Solid State Microwave Power Amplifier

 

2 – 4 GHz

5 – 500 watts

Amplifier Features:

  • Solid State Design
  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged construction & High Reliability
  • Integrated Force Air Cooling
  • Backlit Screen
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote
 

Solid State Amplifier - S42 SeriesInstruments for Industry, S42 Series Solid State amplifiers are state-of-the-art amplifiers and provide outstanding RF performance. The S42 Series amplifiers operate over the frequency range from 2.0 – 4.0 GHz and can be supplied at power levels from 5 watts to 500 watts offering all the control and communication features needed for today’s automated test systems. From the ground up, the S42 Series amplifiers are built to withstand rugged handling, whether it's being shipped to you or hauled around from site to site. They feature heavy-duty aluminum chassis construction with a modular approach for easy access and service.

Operation safety and ease of use are paramount in IFI product designs. The IFI S42 Series include a full complement of RF and hardware protection circuits including high VSWR, over-current, voltage protection, redundant thermal and airflow sensors for the module and the system level. In addition, the S42 series includes a state-of-the-art interface that is sophisticated, comprehensive, and yet simple to use.

The backlit LCD screen shows forward/reverse power indication, system status and self-diagnostic information. All the amplifiers operating parameters are simultaneously available in the amplifier front panel display as well as over the remote bus. Selection switches allow you to switch the amplifier to the desired mode of operation for local control if the unit is not being operated remotely.

For computer automation both an RS-232 and IEEE interface are provided as standard. To meet individual application needs, the S42 Series amplifiers can be easily customized with other options. With this capability and its reliable elegant design, the S42 series amplifiers are the perfect system for your applications.

Model Number Frequency Range
(GHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
kVA Weight
(lbs.)
Size (Inches)
(W x D x H)
S42-5 2 – 4 5 5 37 0.1 25 19 x 24 x 5.25
S42-10 2 – 4 10 8 40 0.1 28 19 x 24 x 5.25
S42-20 2 – 4 20 15 43 0.2 32 19 x 24 x 5.25
S42-25 2 – 4 25 20 44 0.25 36 19 x 24 x 5.25
S42-40 2 – 4 40 30 46 0.3 40 19 x 24 x 5.25
S42-50 2 – 4 50 40 47 0.4 50 19 x 24 x 7
S42-75 2 – 4 75 60 49 0.6 55 19 x 24 x 7
S42-100 2 – 4 100 80 50 0.8 60 19 x 24 x 8.75
S42-150 2 – 4 150 130 52 1.2 80 19 x 25 x 10.5
S42-200 2 – 4 200 150 53 1.5 90 19 x 25 x 10.5
S42-250 2 – 4 250 200 54 2 200 (2X) 19 x 25 x 10.5
S42-300 2 – 4 300 250 55 2.5 220 (2X) 19 x 25 x 10.5
S42-400 2 – 4 400 350 56 3 400 Rack Integrated
S42-500 2 – 4 500 450 57 4 450 Rack Integrated

 

Standard Features for IFI S42-Series Solid State Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 and RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local and Remote, 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics and Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI S42-Series Solid State Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female, unless specified otherwise
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet maximum)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    120/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI S42-Series Solid State Amplifiers

  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis slides for a 19" rack mounting
  • Option 118A: RF Input On Front Output On Rear
  • Option 118B: RF Input On Rear Output On Front

 

S31 Series, Solid State Microwave Power Amplifier

 

0.8 – 3.0 GHz

5 – 500 watts

Amplifier Features:

  • Solid State Design
  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged construction & High Reliability
  • Integrated Force Air Cooling
  • Backlit Screen
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote
 

Solid State Amplifier - S31 SeriesInstruments for Industry, S31 Series Solid State amplifiers are state-of-the-art amplifiers and provide outstanding RF performance. The S31 Series amplifiers operate over the frequency range from 0.8 – 3.0 GHz and can be supplied at power levels from 5 watts to 500 watts offering all the control and communication features needed for today’s automated test systems. From the ground up, the S31 Series amplifiers are built to withstand rugged handling, whether it's being shipped to you or hauled around from site to site. They feature heavy-duty aluminum chassis construction with a modular approach for easy access and service.

Operation safety and ease of use are paramount in IFI product designs. The IFI S31 Series include a full complement of RF and hardware protection circuits including high VSWR, over-current, voltage protection, redundant thermal and airflow sensors for the module and the system level. In addition, the S31 series includes a state-of-the-art interface that is sophisticated, comprehensive, and yet simple to use.

The backlit LCD screen shows forward/reverse power indication, system status and self-diagnostic information. All the amplifiers operating parameters are simultaneously available in the amplifier front panel display as well as over the remote bus. Selection switches allow you to switch the amplifier to the desired mode of operation for local control if the unit is not being operated remotely.

For computer automation both an RS-232 and IEEE interface are provided as standard. To meet individual application needs, the S31 Series amplifiers can be easily customized with other options. With this capability and its reliable elegant design, the S31 series amplifiers are the perfect system for your applications.

Model Number Frequency Range
(GHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
kVA Weight
(lbs.)
Size (Inches)
(W x D x H)
S31-5 0.8 – 3.0 5 5 37 0.1 30 19 x 24 x 5.25
S31-10 0.8 – 3.0 10 8 40 0.1 33 19 x 24 x 5.25
S31-20 0.8 – 3.0 20 15 43 0.2 35 19 x 24 x 5.25
S31-25 0.8 – 3.0 25 20 44 0.25 37 19 x 24 x 5.25
S31-40 0.8 – 3.0 40 30 46 0.3 45 19 x 24 x 5.25
S31-50 0.8 – 3.0 50 40 47 0.4 60 19 x 24 x 7
S31-75 0.8 – 3.0 75 60 49 0.6 75 19 x 24 x 7
S31-100 0.8 – 3.0 100 80 50 0.8 80 19 x 24 x 8.75
S31-150 0.8 – 3.0 150 130 52 1.2 100 19 x 24 x 8.75
S31-200 0.8 – 3.0 200 150 53 1.5 120 19 x 25 x 10.5
S31-250 0.8 – 3.0 250 200 54 2 200 (2X) 19 x 25 x 10.5
S31-300 0.8 – 3.0 300 250 55 2.5 220 (2X) 19 x 25 x 10.5
S31-400 0.8 – 3.0 400 350 56 3 450 Rack Integrated
S31-500 0.8 – 3.0 500 450 57 4 500 Rack Integrated

 

Standard Features for IFI S31-Series Solid State Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 and RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local and Remote, 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics and Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI S31-Series Solid State Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female, unless specified otherwise
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet maximum)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    120/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI S31-Series Solid State Amplifiers

  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis slides for a 19" rack mounting
  • Option 118A: RF Input On Front Output On Rear
  • Option 118B: RF Input On Rear Output On Front

 

S41 Series, Solid State Microwave Power Amplifier

 

0.8 – 4.2 GHz

5 – 500 watts

Amplifier Features:

  • Solid State Design
  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged construction & High Reliability
  • Integrated Force Air Cooling
  • Backlit Screen
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote
 

Solid State Amplifier - S41 SeriesInstruments for Industry, S41 Series Solid State amplifiers are state-of-the-art amplifiers and provide outstanding RF performance. The S41 Series amplifiers operate over the frequency range from 0.8 – 4.2 GHz and can be supplied at power levels from 5 watts to 500 watts offering all the control and communication features needed for today’s automated test systems. From the ground up, the S41 Series amplifiers are built to withstand rugged handling, whether it's being shipped to you or hauled around from site to site. They feature heavy-duty aluminum chassis construction with a modular approach for easy access and service.

Operation safety and ease of use are paramount in IFI product designs. The IFI S41 Series include a full complement of RF and hardware protection circuits including high VSWR, over-current, voltage protection, redundant thermal and airflow sensors for the module and the system level. In addition, the S41 series includes a state-of-the-art interface that is sophisticated, comprehensive, and yet simple to use.

The backlit LCD screen shows forward/reverse power indication, system status and self-diagnostic information. All the amplifiers operating parameters are simultaneously available in the amplifier front panel display as well as over the remote bus. Selection switches allow you to switch the amplifier to the desired mode of operation for local control if the unit is not being operated remotely.

For computer automation both an RS-232 and IEEE interface are provided as standard. To meet individual application needs, the S41 Series amplifiers can be easily customized with other options. With this capability and its reliable elegant design, the S41 series amplifiers are the perfect system for your applications.

Model Number Frequency Range
(GHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
kVA Weight
(lbs.)
Size (Inches)
(W x D x H)
S41-5 0.8 – 4.2 5 5 37 0.1 30 19 x 24 x 5.25
S41-10 0.8 – 4.2 10 8 40 0.1 33 19 x 24 x 5.25
S41-20 0.8 – 4.2 20 15 43 0.2 35 19 x 24 x 5.25
S41-25 0.8 – 4.2 25 20 44 0.25 37 19 x 24 x 5.25
S41-40 0.8 – 4.2 40 30 46 0.3 45 19 x 24 x 5.25
S41-50 0.8 – 4.2 50 40 47 0.4 60 19 x 24 x 7
S41-75 0.8 – 4.2 75 60 49 0.6 75 19 x 24 x 7
S41-100 0.8 – 4.2 100 80 50 0.8 80 19 x 24 x 8.75
S41-150 0.8 – 4.2 150 130 52 1.2 100 19 x 24 x 8.75
S41-200 0.8 – 4.2 200 150 53 1.5 120 19 x 25 x 10.5
S41-250 0.8 – 4.2 250 200 54 2 200 (2X) 19 x 25 x 10.5
S41-300 0.8 – 4.2 300 250 55 2.5 220 (2X) 19 x 25 x 10.5
S41-400 0.8 – 4.2 400 350 56 3 450 Rack Integrated
S41-500 0.8 – 4.2 500 450 57 4 500 Rack Integrated

 

Standard Features for IFI S41-Series Solid State Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 and RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local and Remote, 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics and Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI S41-Series Solid State Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female, unless specified otherwise
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet maximum)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    120/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI S41-Series Solid State Amplifiers

  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis slides for a 19" rack mounting
  • Option 118A: RF Input On Front Output On Rear
  • Option 118B: RF Input On Rear Output On Front

 

S31-500-900P Dual Mode CW/Pulse Solid State Microwave Power Amplifier

 

0.8 – 3.1 GHz

500 Watts CW / 900 Watts Pulse

Amplifier Features:

  • Solid State Design
  • Rugged Construction & High Reliability
  • Instantaneous Broadband Frequency range
  • Backlit screen
  • Modular Design Construction
  • Integrated Force Air Cooling
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote
 

s31-500-900p SMInstruments for Industry, S31-500-900P Solid State amplifier is state-of-the-art and provides outstanding RF performance. The S31-500-900P amplifier operates over the frequency range from 0.8 – 3.1 GHz and supplies 500 watts CW / 900 watts Pulse offering all the control and communication features needed for today's automated test systems. From the ground up, the S31-500-900P amplifier is built to withstand rugged handling, whether it's being shipped to you or hauled from site to site. They feature heavy-duty aluminum chassis construction with a modular approach for easy access and service. The S31-500-900P is perfectly suited for automotive testing as well as general purpose industrial applications.

Operation safety and ease of use are paramount in IFI product designs. The IFI S31-500-900P amplifier includes a full complement of RF and hardware protection circuits including high VSWR, over-current,voltage protection, redundant thermal and airflow sensors for the module and the system level. In addition, the S31-500-900P includes a state-of-the-art interface that is sophisticated, comprehensive, and yet simple to use.

The backlit LCD screen shows forward/reverse power indication, system status and self-diagnostic information. Peak power metering is incorporated to measure forward and reflected power while in the pulse mode. All the amplifiers operating parameters are simultaneously available in the amplifier front panel display as well as over the remote bus. Selection switches allow you to switch the amplifier to the desired mode of operation for local control if the unit is not being operated remotely.

For computer automation both an RS-232 and IEEE interface are provided as standard. To meet individual application needs, the S31-500-900P Series amplifiers can be easily customized with other options. With this capability and its reliable elegant design, the S31-500-900P series amplifiers are the perfect system for your applications.

Model Number Frequency Range
(GHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
Mains
(kVa)
Weight
(lbs.)
Size (Inches)
(W x D x H)
S31-500-900P 0.8 – 3.1 500 CW 900+ Pulse 400 CW 60 3 CW 120 19 x 24 x 7 PS
19 x 24 x 10.5 PA

 

Standard Features for IFI S31-500-900P Dual Mode Solid State Amplifier

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 and RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local and Remote, 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics and Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI S31-500-900P Series Solid State Amplifier Specifications

  • Frequency Range: 0.8 – 3.1 GHz
  • Rated Output Power: 500 Watts CW / 900 Watts Pulse
  • Gain @ Rated Power: 60 dB
  • Prime Power: As Required (Some are listed below)
  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female, other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet maximum)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Pulse Input: BNC Female Front Panel {+5 volts into 50 ohms}
  • Pulse Width: 100 ns – 100 usec
  • PRF Range: 0 – 100 kHz Standard, Higher PRF ranges available
  • Duty Cycle: 10% Standard
  • Rise & Fall Time: 15 ns nominal; 25 ns maximum
  • Pulse to Pulse Jitter: <0.1 dB
  • Pulse Width Jitter: +/- 5 ns maximum
  • Pulse Delay: 500 ns maximum / 300 ns typical
  • Pulse Droop: 0.5 dB/100 usecs, 0.1 dB/10 usec
  • Pulse On/Off Ratio: 80 dB
  • Pulse to Pulse Stability: 0.2 dB
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    120/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI S31-500-900P Series Solid State Amplifiers

  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis slides for a 19" rack mounting
  • Option 118A: RF Input On Front Output On Rear
  • Option 118B: RF Input On Rear Output On Front

 

Connect With Us Here...

  • Facebook Page: 166434726735166
  • Linked In: company/instruments-for-industry
  • Twitter: #!/IFI_Amplifiers
  • YouTube: user/IFIAmplifiers

Instruments For Industry

903 South Second Street • Ronkonkoma, NY
(631) 467-8400 • Fax: (631) 467-8558 
© 2008 All rights reserved