Solid state RF microwave amplifier products.

SVC Series, Solid State Amplifiers

 

100 – 500 MHz

10 – 5000 watts
Minimum Rated Power

Amplifier Features:

  • Solid State Design
  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged construction & High Reliability
  • Integrated Force Air Cooling
  • Backlit Screen
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote
 

Solid State Amplifier - SVC SeriesInstruments for Industry, SVC-Series Amplifiers provide outstanding RF performance. These products are available in a wide range of power levels from 10 watts to 5000 watts in the 100 – 500 MHz frequency range. These state-of-the-art solid-state power amplifiers are specifically designed for laboratory and all testing applications.

IFI RF amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Sixth generation LDMOS Transistors provide reliable brute-power performance at frequencies up to 500 MHz.

Our RF power amplifiers feature heavy-duty individually shielded aluminum housings at the module level. This concept of a shielded modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

From the ground up, the “SVC-SERIES” products are structurally engineered to withstand operation in mechanically hostile environments. Ruggedized versions are available for applications that will be exposed to very harsh environments.

Model Number Frequency Range
(MHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
kVA Weight
(lbs.)
Size (Inches)
(W x D x H)
SVC10 100 – 500 10 10 40 0.1 25 19 x 24 x 5.25
SVC25 100 – 500 25 25 44 0.2 28 19 x 24 x 5.25
SVC50 100 – 500 50 50 47 0.4 32 19 x 24 x 5.25
SVC100 100 – 500 100 80 50 0.5 36 19 x 25 x 7
SVC150 100 – 500 150 120 52 0.8 40 19 x 25 x 7
SVC200 100 – 500 200 160 53 1.4 50 19 x 25 x 7
SVC250 100 – 500 250 200 54 1.6 60 19 x 25 x 7
SVC350 100 – 500 350 250 56 3 80 19 x 24 x 8.75
SVC500 100 – 500 500 350 57 4 120 19 x 24 x 8.75
SVC1000 100 – 500 1000 800 60 8 250 (2X) 19 x 25 x 10.5
SVC2000 100 – 500 2000 1600 63 15 500 Rack Integrated
SVC3000 100 – 500 3000 2500 65 20 700 Rack Integrated
SVC5000 100 – 500 5000 4500 67 25 1000 Rack Integrated

 

Standard Features for IFI SVC-Series Solid State Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 and RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local and Remote, 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics and Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI SVC-Series Solid State Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female up to 1KW amps, SC or 7/16 available, 7/16 2KW/3KW/5KW amps. Other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1, 2.0:1 with full power
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    120/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI SVC-Series Solid State Amplifiers

  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis slides for a 19" rack mounting
  • Option 118A: RF Input On Front Output On Rear
  • Option 118B: RF Input On Rear Output On Front

 

SVCE Series, Solid State Amplifiers

 

100 – 1000 MHz

20 – 500 watts
Minimum Rated Power

Amplifier Features:

  • Solid State Design
  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged construction & High Reliability
  • Integrated Force Air Cooling
  • Backlit Screen
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote
 

Solid State Amplifier - SVCE SeriesInstruments for Industry, SVCE-Series Amplifiers provide outstanding RF performance. These products are available in a wide range of power levels from 10 watts to 5000 watts in the 20 – 500 MHz frequency range. These state-of-the-art solid-state power amplifiers are specifically designed for laboratory and all testing applications.

IFI RF amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Sixth generation LDMOS Transistors provide reliable brute-power performance at frequencies up to 500 MHz.

Our RF power amplifiers feature heavy-duty individually shielded aluminum housings at the module level. This concept of a shielded modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

From the ground up, the “SVCE-SERIES” products are structurally engineered to withstand operation in mechanically hostile environments. Ruggedized versions are available for applications that will be exposed to very harsh environments.

Model Number Frequency Range
(MHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
kVA Weight
(lbs.)
Size (Inches)
(W x D x H)
SVCE10 20 – 500 10 10 40 0.1 25 19 x 24 x 5.25
SVCE25 20 – 500 25 25 44 0.2 30 19 x 24 x 5.25
SVCE50 20 – 500 50 50 47 0.4 45 19 x 24 x 5.25
SVCE100 20 – 500 100 80 50 0.5 60 19 x 25 x 7
SVCE150 20 – 500 150 120 52 0.8 75 19 x 25 x 7
SVCE200 20 – 500 200 160 53 1.4 120 19 x 25 x 7
SVCE250 20 – 500 250 200 54 1.6 140 19 x 25 x 7
SVCE350 20 – 500 350 250 56 3 160 19 x 24 x 8.75
SVCE500 20 – 500 500 350 57 4 200 19 x 24 x 8.75
SVCE1000 20 – 500 1000 800 60 8 500 (2X) 19 x 25 x 10.5
SVCE2000 20 – 500 2000 1600 63 15 1000 Rack Integrated
SVCE3000 20 – 500 3000 2500 64 20 1500 Rack Integrated
SVCE5000 20 – 500 4000 4500 65 25 2000 Rack Integrated

 

Standard Features for IFI SVCE-Series Solid State Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 and RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local and Remote, 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics and Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI SVCE-Series Solid State Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female up to 1KW amps, SC or 7/16 available, 7/16 2KW/3KW/5KW amps. Other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    120/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI SVCE-Series Solid State Amplifiers

  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis slides for a 19" rack mounting
  • Option 118A: RF Input On Front Output On Rear
  • Option 118B: RF Input On Rear Output On Front

 

SMC Series, Solid State Amplifiers

 

80 - 1000 MHz

10 – 3000 watts
Minimum Rated Power

Amplifier Features:

  • Solid State Design
  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged construction & High Reliability
  • Integrated Force Air Cooling
  • Backlit Screen
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote
 

Solid State Amplifier - SMC SeriesInstruments for Industry, SMC-Series Amplifiers provide outstanding RF performance. These products are available in a wide range of power levels from 10 watts to 3000 watts in the 80 – 1000 MHz frequency range. These state-of-the-art solid-state power amplifiers are specifically designed for laboratory and all testing applications.

IFI RF amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Sixth generation LDMOS Transistors provide reliable brute-power performance at frequencies up to 1000 MHz.

Our RF power amplifiers feature heavy-duty individually shielded aluminum housings at the module level. This concept of a shielded modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

From the ground up, the “SMC-SERIES” products are structurally engineered to withstand operation in mechanically hostile environments. Ruggedized versions are available for applications that will be exposed to very harsh environments.

Model Number Frequency Range
(MHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
kVA Weight
(lbs.)
Size (Inches)
(W x D x H)
SMC10 80 – 1000 10 10 40 0.1 25 19 x 24 x 5.25
SMC25 80 – 1000 25 25 44 0.2 30 19 x 24 x 5.25
SMC50 80 – 1000 50 50 47 0.4 45 19 x 25 x 5.25
SMC100 80 – 1000 100 80 50 0.5 60 19 x 25 x 7.0
SMC150 80 – 1000 150 120 52 0.8 75 19 x 24 x 8.75
SMC200 80 – 1000 200 160 53 1.4 120 19 x 24 x 8.75
SMC250 80 – 1000 250 200 54 1.6 140 19 x 25.25 x 10.5
SMC350 80 – 1000 350 250 56 3 160 19 x 25.25 x 10.5
SMC500 80 – 1000 500 350 57 4 200 (2X) 19 x 25.25 x 10.5
SMC750 80 – 1000 750 600 59 6 250 (2X) 19 x 25.25 x 10.5
SMC1000 80 – 1000 1000 800 60 8 500 Rack Integrated
SMC2000 80 – 1000 2000 1500 63 15 1000 Rack Integrated
SMC2500 80 – 1000 2500 1800 64 20 1500 Rack Integrated
SMC3000 80 – 1000 3000 2500 65 25 2000 Rack Integrated

 

Standard Features for IFI SMC-Series Solid State Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 and RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local and Remote, 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics and Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI SMC-Series Solid State Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female up to 1KW amps, SC or 7/16 available, 7/16 2KW-3KW amps. Other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    120/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI SMC-Series Solid State Amplifiers

  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis slides for a 19" rack mounting
  • Option 118A: RF Input On Front Output On Rear
  • Option 118B: RF Input On Rear Output On Front

 

SMCL Series, Solid State Amplifiers

 

100 – 1000 MHz

10 – 3000 watts
Minimum Rated Power

Amplifier Features:

  • Solid State Design
  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged construction & High Reliability
  • Integrated Force Air Cooling
  • Backlit Screen
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote
 

Solid State Amplifier - SMCL SeriesInstruments for Industry, SMCL-Series Amplifiers provide outstanding RF performance. These products are available in a wide range of power levels from 10 watts to 3000 watts in the 100 – 1000 MHz frequency range. These state-of-the-art solid-state power amplifiers are specifically designed for laboratory and all testing applications.

IFI RF amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Sixth generation LDMOS Transistors provide reliable brute-power performance at frequencies up to 1000 MHz.

Our RF power amplifiers feature heavy-duty individually shielded aluminum housings at the module level. This concept of a shielded modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

From the ground up, the “SMCL-SERIES” products are structurally engineered to withstand operation in mechanically hostile environments. Ruggedized versions are available for applications that will be exposed to very harsh environments.

Model Number Frequency Range
(MHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
kVA Weight
(lbs.)
Size (Inches)
(W x D x H)
SMCL10 100 – 1000 10 10 40 0.1 25 19 x 24 x 5.25
SMCL25 100 – 1000 25 25 44 0.2 30 19 x 24 x 5.25
SMCL50 100 – 1000 50 50 47 0.4 45 19 x 25 x 5.25
SMCL100 100 – 1000 100 80 50 0.5 60 19 x 25 x 7.0
SMCL150 100 – 1000 150 120 52 0.8 75 19 x 24 x 8.75
SMCL200 100 – 1000 200 160 53 1.4 120 19 x 24 x 8.75
SMCL250 100 – 1000 250 200 54 1.6 140 19 x 25.25 x 10.5
SMCL350 100 – 1000 350 250 56 3 160 19 x 25.25 x 10.5
SMCL500 100 – 1000 500 350 57 4 200 (2X) 19 x 25.25 x 10.5
SMCL750 100 – 1000 750 600 59 6 250 (2X) 19 x 25.25 x 10.5
SMCL1000 100 – 1000 1000 800 60 8 500 Rack Integrated
SMCL2000 100 – 1000 2000 1500 63 15 1000 Rack Integrated
SMCL2500 100 – 1000 2500 1800 64 20 1500 Rack Integrated
SMCL3000 100 – 1000 3000 2500 65 25 2000 Rack Integrated

 

Standard Features for IFI SMCL-Series Solid State Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 and RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local and Remote, 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics and Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI SMCL-Series Solid State Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female up to 1KW amps, SC or 7/16 available, 7/16 2KW-3KW amps. Other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    120/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI SMCL-Series Solid State Amplifiers

  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis slides for a 19" rack mounting
  • Option 118A: RF Input On Front Output On Rear
  • Option 118B: RF Input On Rear Output On Front

 

CMCL-Series, Solid State RF Power Amplifier

 

20 – 1000 MHz

10 – 1000 watts
Minimum Rated Power
"Class A" RF Power Amplifier

Amplifier Features:

  • Solid State Design
  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged construction & High Reliability
  • Integrated Force Air Cooling
  • Backlit Screen
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote
 

Solid State Amplifier - CMCL SeriesThe IFI CMCL-series Amplifiers provide outstanding RF performance. These products are available in a wide range of power levels from 10 watts to 1000 watts in the 20 – 1000 MHz frequency range. These state-of-the-art solid-state power amplifiers are specifically designed for laboratory and all testing applications.

IFI RF amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Sixth generation LDMOS Transistors provide reliable brute-power performance at frequencies up to 1000 MHz.

Our RF power amplifiers feature heavy-duty individually shielded aluminum housings at the module level. This concept of a shielded modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

From the ground up, the “CMCL-SERIES” products are structurally engineered to withstand operation in mechanically hostile environments. Ruggedized versions are available for applications that will be exposed to very harsh environments.

Model Number Frequency Range
(MHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
kVA Weight
(lbs.)
Size (Inches)
(W x D x H)
CMCL10 20 – 1000 10 10 40 0.1 25 19 x 24 x 5.25
CMCL25 20 – 1000 25 25 44 0.2 30 19 x 24 x 5.25
CMCL50 20 – 1000 50 40 47 0.4 35 19 x 24 x 5.25
CMCL100 20 – 1000 100 80 50 0.5 50 19 x 24 x 7.0
CMCL150 20 – 1000 150 120 52 0.8 75 19 x 25.25 x 8.75
CMCL200 20 – 1000 200 160 53 1 80 19 x 25.25 x 8.75
CMCL250 20 – 1000 250 200 54 1.5 95 19 x 25.25 x 10.5
CMCL300 20 – 1000 300 250 55 2.2 110 19 x 25.25 x 10.5
CMCL350 20 – 1000 350 300 56 3 150 19 x 25.25 x 10.5
CMCL500 20 – 1000 500 400 57 4 300 (2X) 19 x 25.25 x 10.5
CMCL750 20 – 1000 750 600 59 6 500 Rack Integrated
CMCL1000 20 – 1000 1000 800 60 8 800 Rack Integrated

 

Standard Features for IFI CMCL-Series Solid State Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 and RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local and Remote, 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics and Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI CMCL-Series Solid State Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female up to 1KW amps, SC or 7/16 available. Other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    120/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI CMCL-Series Solid State Amplifiers

  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis slides for a 19" rack mounting
  • Option 118A: RF Input On Front Output On Rear
  • Option 118B: RF Input On Rear Output On Front

 

Connect With Us Here...

  • Facebook Page: 166434726735166
  • Linked In: company/instruments-for-industry
  • Twitter: #!/IFI_Amplifiers
  • YouTube: user/IFIAmplifiers

Instruments For Industry

903 South Second Street • Ronkonkoma, NY
(631) 467-8400 • Fax: (631) 467-8558 
© 2008 All rights reserved