Solid State RF Power Amplifier: SCCXE-Series

 

10 kHz – 250 MHz

10 – 1200 watts
Minimum Rated Power
RF Power Amplifier

RF Solid-State
Amplifier Features:

  • Solid State Design
  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged construction & High Reliability
  • Integrated Force Air Cooling
  • Backlit Screen
  • Self-diagnostic circuitry
  • IEEE-488 interface & RS232 Remote
 

Solid State Amplifier - SCCXE SeriesInstruments for Industry, SCCXE-Series Solid State Amplifiers provide outstanding RF performance. These products are available in a wide range of power levels from 10 watts to 1200 watts in the 10 kHz – 250 MHz frequency range. These state-of-the-art solid-state power amplifiers are specifically designed for laboratory and all testing applications.

IFI RF solid-state amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Sixth generation LDMOS Transistors provide reliable brute-power performance at frequencies up to 250 MHz.

Our RF solid-state power amplifiers feature individually shielded aluminum assemblies for the module level. This concept of a shielded modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities. From the ground up, the “Solid-State SCCXE-SERIES amplifier” products are structurally engineered to withstand operation in mechanically hostile environments. Ruggedized versions are available for applications that will be exposed to very harsh environments.

Model Number Frequency Range
(kHz – MHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
kVA Weight
(lbs.)
Size (Inches)
(W x D x H)
SCCXE10 10 kHz – 250 MHz 10 10 40 0.1 33 19 x 24 x 5.25
SCCXE25 10 kHz – 250 MHz 25 25 44 0.2 35 19 x 24 x 5.25
SCCXE50 10 kHz – 250 MHz 50 50 47 0.4 36 19 x 24 x 5.25
SCCXE100 10 kHz – 250 MHz 100 80 50 0.5 38 19 x 24 x 5.25
SCCXE150 10 kHz – 250 MHz 150 100 52 0.8 40 19 x 24 x 5.25
SCCXE200 10 kHz – 250 MHz 200 160 53 1.5 80 19 x 27.0 x 14.0
SCCXE250 10 kHz – 250 MHz 250 200 54 2 90 19 x 27.0 x 14.0
SCCXE350 10 kHz – 250 MHz 350 280 56 2.5 95 19 x 27.0 x 14.0
SCCXE500 10 kHz – 250 MHz 500 300 57 3 100 19 x 27.0 x 14.0
SCCXE800 10 kHz – 250 MHz 800 500 60 5 400 Rack Integrated
SCCXE1200 10 kHz – 250 MHz 1200 800 62 10 650 Rack Integrated

 

Standard Features for IFI SCCXE-Series Solid State Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 and RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local and Remote, 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics and Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI SCCXE-Series Solid State Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female. Other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    100/110/115/120 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI SCCXE-Series Solid State Amplifiers

  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis slides for a 19" rack mounting
  • Option 118A: RF Input On Front Output On Rear
  • Option 118B: RF Input On Rear Output On Front

Specfications are subject to change without noticification © IFI-2011

Connect With Us Here...

  • Facebook Page: 166434726735166
  • Linked In: company/instruments-for-industry
  • Twitter: #!/IFI_Amplifiers
  • YouTube: user/IFIAmplifiers

Instruments For Industry

903 South Second Street • Ronkonkoma, NY
(631) 467-8400 • Fax: (631) 467-8558 
© 2008 All rights reserved