Millimeter amplifiers are designed using (TWT) Traveling Wave Tube Amplifiers. IFI Millimeter TWTA's operate in the 18-50 GHz range. 

Applications for millimeter amplifiers include EMC (electromechanicl compliance) and EMI (electro mechanical interference) testing applications.

GT4026 Series Gridded (Pulse & CW) Millimeter TWT Amplifiers

 

26.5 – 40.0 GHz

10 – 200 watts
Minimum Rated Power

Amplifier Features:

  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged Construction & High Reliability
  • Backlit LCD Display
  • Integrated Force Air Cooling
  • Self-diagnostic circuitry
  • IEEE-488 interface, RS232 & Ethernet Remote available
  • Solid State Power Supply
 

Gridded Millimeter TWT Amplifiers - GT4026 SeriesInstruments for Industry, GT4026 Series Amplifiers provide outstanding RF performance. Our “GT4026 Series” products are a mature design but incorporate the latest features with respect to control and monitoring. These amplifiers are “State of the Art”; have field proven reliability and unsurpassed performance as the best in the industry. These products are available in a wide range of power levels from 10 watts to 200 watts in the 26.5 GHz – 40.0 GHz frequency range.

Operation safety and ease of use are paramount in IFI product designs. The IFI GT4026 Series include a full complement of RF and hardware protection systems including high VSWR, over-current and voltage protection as well as redundant thermal and airflow sensors to prevent the TWT from overheating. In addition, the GT4026 series includes a state-of-the-art interface that is sophisticated, comprehensive, but yet simple to use. Our amplifiers feature modular construction and this concept of modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

The backlit LCD screen shows forward/reverse power indication, system status and self-diagnostic information. All the amplifier operating parameters are simultaneously available in the amplifier front panel display as well as over the remote bus. Selection switches allow you to switch the amplifier to the desired mode of operation for local control if the unit is not being operated remotely.

For computer automation both an RS-232 and IEEE-488 interface are included. To meet individual application needs, the GT4026 Series amplifiers can be easily customized with harmonic filters or other options. With this capability and its reliable elegant design, the GT4026 series amplifiers are the perfect amplifier for your microwave needs. IFI offers different size packages and configurations to best suit your application. A product and design built to last!

Model Number Frequency Range
(GHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
Mains
(kVA)
Weight
(lbs.)
Size (Inches)
(W x D x H)
GT4026-10 26.5 – 40.0 10 8 40 0.7 45 19 x 24 x 5.25
GT4026-25 26.5 – 40.0 25 10 44 0.8 45 19 x 24 x 5.25
GT4026-40 26.5 – 40.0 40 20 46 0.9 45 19 x 24 x 5.25
GT4026-50 26.5 – 40.0 50 25 47 1.0 45 19 x 24 x 5.25
GT4026-80 26.5 – 40.0 80 35 49 1.8 80 19 x 25.25 x 14
GT4026-100 26.5 – 40.0 100 45 50 1.9 90 19 x 25.25 x 14
GT4026-125 26.5 – 40.0 125 50 52 2.0 100 19 x 25.25 x 14
GT4026-200 26.5 – 40.0 200 100 53 3.5 200 (2x) 19 x 27 x 14

 

 

Standard Features for IFI GT4026 Series TWT Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 & RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics & Status Indicators
  • Filament/Beam Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI GT4026 Series TWT Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type K Female, unless specified otherwise
  • RF Output Connector: WR28 (Other waveguides available by request or specification (see Option 117)
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Pulse Input: BNC Female Front Panel {TTL into 50 ohms standard} consult factory for special requirements
  • Pulse Width Range: Up to CW
  • PRF Range: Up to 100 kHz Standard, Higher PRF ranges available consult factory
  • Duty Cycle: Up to CW (Higher PRF ranges subject to TWT specification)
  • Rise & Fall Time: 25 nsec nominal; 40 nsec maximum
  • Pulse to Pulse Jitter: +/- 5 nsec maximum
  • Pulse Width Jitter (Distortion: +/- 5 nsec maximum
  • Pulse Recovery Time: 150 nsec maximum
  • Pulse Delay: 250 nsec maximum / 180 nsec typical
  • Pulse Droop: 0.5 dB/100 usecs, 0.1 dB/10 usec
  • Power Output Stability: 0.2 dB Pulse to Pulse at constant drive level & PRF
  • Pulse On/Off Ratio: 80 dB
  • Phase Stability Pulse to Pulse: +/-1 degree nominal
  • Temperature: 0º to 50º C operating, -40º to 70º C non-operating
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet operating, 50,000 non-operating
  • Cooling System: Air cooled, self-contained
  • Modulation: All types, AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table
  • Spurious Outputs: -60 dBc nominal
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    200, 220, 230, 240 VAC ±10% 50/60 Hz, single phase
    100/200VAC,115/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta and/or 400 Hz power is available.
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI GT4026 Series TWT Amplifiers

  • Option 103 G/D: VSWR Reflected Power Protection “Graceful Degradation Feature” which will automatically reduce the input drive and fold back the output power when the average reflected power exceeds a preset limit of 3.0:1. The unit operates without damage or oscillation into any magnitude of phase or load impedance.
  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis Slides for 19” Rack Mounting
  • Option 118F or R: Front Panel RF Connections 118R for Rear Panel RF Connections
  • Option 123F or R: Reflected RF Sample Port -40, -50 or -60 dB N or SMA, Front or Rear Panel

 

GT2618 Series Gridded (Pulse & CW) Millimeter TWT Amplifiers

 

18.0 – 26.5 GHz

10 – 200 watts
Minimum Rated Power

Amplifier Features:

  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged Construction & High Reliability
  • Backlit LCD Display
  • Integrated Force Air Cooling
  • Self-diagnostic circuitry
  • IEEE-488 interface, RS232 & Ethernet Remote available
  • Solid State Power Supply
 

Gridded Millimeter TWT Amplifiers - GT2618 SeriesInstruments for Industry, GT2618 Series Amplifiers provide outstanding RF performance. Our “GT2618 Series” products are a mature design but incorporate the latest features with respect to control and monitoring. These amplifiers are “State of the Art”; have field proven reliability and unsurpassed performance as the best in the industry. These products are available in a wide range of power levels from 10 watts to 200 watts in the 18.0 GHz – 26.5 GHz frequency range.

Operation safety and ease of use are paramount in IFI product designs. The IFI GT2618 Series include a full complement of RF and hardware protection systems including high VSWR, over-current and voltage protection as well as redundant thermal and airflow sensors to prevent the TWT from overheating. In addition, the GT2618 series includes a state-of-the-art interface that is sophisticated, comprehensive, but yet simple to use. Our amplifiers feature modular construction and this concept of modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

The backlit LCD screen shows forward/reverse power indication, system status and self-diagnostic information. All the amplifier operating parameters are simultaneously available in the amplifier front panel display as well as over the remote bus. Selection switches allow you to switch the amplifier to the desired mode of operation for local control if the unit is not being operated remotely.

For computer automation both an RS-232 and IEEE-488 interface are included. To meet individual application needs, the GT2618 Series amplifiers can be easily customized with harmonic filters or other options. With this capability and its reliable elegant design, the GT2618 series amplifiers are the perfect amplifier for your microwave needs. IFI offers different size packages and configurations to best suit your application. A product and design built to last!

Model Number Frequency Range
(GHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
Mains
(kVA)
Weight
(lbs.)
Size (Inches)
(W x D x H)
GT2618-10 18.0 – 26.5 10 8 40 0.7 45 19 x 24 x 5.25
GT2618-25 18.0 – 26.5 25 10 44 0.8 45 19 x 24 x 5.25
GT2618-40 18.0 – 26.5 40 20 46 0.9 45 19 x 24 x 5.25
GT2618-50 18.0 – 26.5 50 25 47 1.0 45 19 x 24 x 5.25
GT2618-80 18.0 – 26.5 80 35 49 1.8 80 19 x 25.25 x 14
GT2618-100 18.0 – 26.5 100 45 50 1.9 90 19 x 25.25 x 14
GT2618-125 18.0 – 26.5 125 50 52 2.0 100 19 x 25.25 x 14
GT2618-200 18.0 – 26.5 200 100 53 3.5 200 (2x) 19 x 27 x 14

 

 

Standard Features for IFI GT2618 Series TWT Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 & RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics & Status Indicators
  • Filament/Beam Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI GT2618 Series TWT Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type K Female, unless specified otherwise
  • RF Output Connector: Type K Female, unless specified otherwise (Other waveguides available by request or specification (see Option 117)
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Pulse Input: BNC Female Front Panel {TTL into 50 ohms standard} consult factory for special requirements
  • Pulse Width Range: Up to CW
  • PRF Range: Up to 100 kHz Standard, Higher PRF ranges available consult factory
  • Duty Cycle: Up to CW (Higher PRF ranges subject to TWT specification)
  • Rise & Fall Time: 25 nsec nominal; 40 nsec maximum
  • Pulse to Pulse Jitter: +/- 5 nsec maximum
  • Pulse Width Jitter (Distortion: +/- 5 nsec maximum
  • Pulse Recovery Time: 150 nsec maximum
  • Pulse Delay: 250 nsec maximum / 180 nsec typical
  • Pulse Droop: 0.5 dB/100 usecs, 0.1 dB/10 usec
  • Power Output Stability: 0.2 dB Pulse to Pulse at constant drive level & PRF
  • Pulse On/Off Ratio: 80 dB
  • Phase Stability Pulse to Pulse: +/-1 degree nominal
  • Temperature: 0º to 50º C operating, -40º to 70º C non-operating
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet operating, 50,000 non-operating
  • Cooling System: Air cooled, self-contained
  • Modulation: All types, AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table
  • Spurious Outputs: -60 dBc nominal
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    200, 220, 230, 240 VAC ±10% 50/60 Hz, single phase
    100/200VAC,115/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta and/or 400 Hz power is available.
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI GT2618 Series TWT Amplifiers

  • Option 103 G/D: VSWR Reflected Power Protection “Graceful Degradation Feature” which will automatically reduce the input drive and fold back the output power when the average reflected power exceeds a preset limit of 3.0:1. The unit operates without damage or oscillation into any magnitude of phase or load impedance.
  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis Slides for 19” Rack Mounting
  • Option 118F or R: Front Panel RF Connections 118R for Rear Panel RF Connections
  • Option 123F or R: Reflected RF Sample Port -40, -50 or -60 dB N or SMA, Front or Rear Panel

 

Medium to High Power Millimeter RF TWT Amplifiers | T4026 Series

 

26.5 – 40.0 GHz

10 – 200 watts
Minimum Rated Power

Amplifier Features:

  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged Construction & High Reliability
  • Backlit LCD Display
  • Integrated Force Air Cooling
  • Self-diagnostic circuitry
  • IEEE-488 interface, RS232 & Ethernet Remote available
  • Solid State Power Supply
 

Medium to High Power Millimeter RF TWT Amplifiers - T4026 SeriesInstruments for Industry, T4026 Series Amplifiers provide outstanding RF performance. Our “T4026 Series” products are a mature design but incorporate the latest features with respect to control and monitoring. These amplifiers are “State of the Art”; have field proven reliability and unsurpassed performance as the best in the industry. These products are available in a wide range of power levels from 10 watts to 200 watts in the 26.5 GHz – 40.0 GHz frequency range.

Operation safety and ease of use are paramount in IFI product designs. The IFI T4026 Series include a full complement of RF and hardware protection systems including high VSWR, over-current and voltage protection as well as redundant thermal and airflow sensors to prevent the TWT from overheating. In addition, the T4026 series includes a state-of-the-art interface that is sophisticated, comprehensive, but yet simple to use. Our amplifiers feature modular construction and this concept of modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

The backlit LCD screen shows forward/reverse power indication, system status and self-diagnostic information. All the amplifier operating parameters are simultaneously available in the amplifier front panel display as well as over the remote bus. Selection switches allow you to switch the amplifier to the desired mode of operation for local control if the unit is not being operated remotely.

For computer automation both an RS-232 and IEEE-488 interface are included. To meet individual application needs, the T4026 Series amplifiers can be easily customized with harmonic filters or other options. With this capability and its reliable elegant design, the T4026 series amplifiers are the perfect amplifier for your microwave needs. IFI offers different size packages and configurations to best suit your application. A product and design built to last!

Model Number Frequency Range
(GHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
Mains
(kVA)
Weight
(lbs.)
Size (Inches)
(W x D x H)
T4026-10 26.5 – 40.0 10 8 40 0.7 45 19 x 24 x 5.25
T4026-25 26.5 – 40.0 25 10 44 0.8 45 19 x 24 x 5.25
T4026-40 26.5 – 40.0 40 20 46 0.9 45 19 x 24 x 5.25
T4026-50 26.5 – 40.0 50 25 47 1.0 45 19 x 24 x 5.25
T4026-80 26.5 – 40.0 80 35 49 1.8 80 19 x 25.25 x 14
T4026-100 26.5 – 40.0 100 45 50 1.9 90 19 x 25.25 x 14
T4026-125 26.5 – 40.0 125 50 52 2.0 100 19 x 25.25 x 14
T4026-200 26.5 – 40.0 200 100 53 3.5 200 19 x 27 x 2x 14

 

 

Standard Features for IFI T4026 Series TWT Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 & RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics & Status Indicators
  • Filament/Beam Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI T4026 Series TWT Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type K Female, unless specified otherwise
  • RF Output Connector: WR28 Other waveguides available by request or specification (see Option 117)
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: All types, AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Cabinet Integrated as needed
  • Spurious Outputs: <-60 dBc nominal
  • Standard Prime Powers:
    100, 110, 115, 120 VAC ±10% 50/60 Hz, single phase
    200, 220, 230, 240 VAC ±10% 50/60 Hz, single phase
    100/200VAC,115/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta and/or 400 Hz power is available.
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI T4026 Series TWT Amplifiers

  • Option 103 G/D: VSWR Reflected Power Protection “Graceful Degradation Feature” which will automatically reduce the input drive and fold back the output power when the average reflected power exceeds a preset limit of 3.0:1. The unit operates without damage or oscillation into any magnitude of phase or load impedance.
  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis Slides for 19” Rack Mounting
  • Option 118F or R: Front Panel RF Connections 118R for Rear Panel RF Connections
  • Option 123F or R: Reflected RF Sample Port -40, -50 or -60 dB N or SMA, Front or Rear Panel

 

T-MM Series High Power Millimeter TWT Amplifiers

 

27.5 – 45.0 GHz

40 – 500 watts
Minimum Rated Power

Amplifier Features:

  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged Construction & High Reliability
  • Backlit LCD Display
  • Integrated Force Air Cooling
  • Self-diagnostic circuitry
  • IEEE-488 interface, RS232 & Ethernet Remote available
  • Solid State Power Supply
 

High Power Millimeter TWT Amplifiers - T-MM SeriesInstruments for Industry, T-MM Series Amplifiers provide outstanding RF performance. Our “T-MM Series” products are a mature design but incorporate the latest features with respect to control and monitoring. These amplifiers are “State of the Art”; have field proven reliability and unsurpassed performance as the best in the industry. These products are available in a wide range of power levels from 10 watts to 200 watts in various frequency bands that cover 27.5 GHz – 45.0 GHz.

Operation safety and ease of use are paramount in IFI product designs. The IFI T-MM Series include a full complement of RF and hardware protection systems including high VSWR, over-current and voltage protection as well as redundant thermal and airflow sensors to prevent the TWT from overheating. In addition, the T-MM series includes a state-of-the-art interface that is sophisticated, comprehensive, but yet simple to use. Our amplifiers feature modular construction and this concept of modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

The backlit LCD screen shows forward/reverse power indication, system status and self-diagnostic information. All the amplifier operating parameters are simultaneously available in the amplifier front panel display as well as over the remote bus. Selection switches allow you to switch the amplifier to the desired mode of operation for local control if the unit is not being operated remotely.

For computer automation both an RS-232 and IEEE-488 interface are included. To meet individual application needs, the T-MM Series amplifiers can be easily customized with harmonic filters or other options. With this capability and its reliable elegant design, the T-MM series amplifiers are the perfect amplifier for your microwave needs. IFI offers different size packages and configurations to best suit your application. A product and design built to last!

Model Number Frequency Range
(GHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
Mains
(kVA)
Weight
(lbs.)
Size (Inches)
(W x D x H)
T3027-120 27.5 – 30.0 120 60 51 1.0 45 19 x 24 x 5.25
T3027-150 27.5 – 30.0 150 75 52 1.2 45 19 x 24 x 5.25
T3027-250 27.5 – 30.0 250 125 54 1.5 75 19 x 25.25 x 8.75
T3127-250 27.5 – 31.0 250 125 54 1.5 75 19 x 25.25 x 8.75
T3127-400 27.5 – 31.0 400 200 56 3.5 180 19 x 25.25 x 14
T3130-120 30.0 – 31.0 120 60 52 1.2 45 19 x 24 x 5.25
T3832-40 32.0 – 38.0 40 20 46 0.8 45 19 x 24 x 5.25
T3832-60 32.0 – 38.0 60 30 48 0.9 45 19 x 24 x 5.25
T3832-80 32.0 – 38.0 80 40 49 1.0 50 19 x 24 x 5.25
T4540-70 40.0 – 45.0 70 30 49 1.5 80 19 x 25.25 x 10.5

 

 

Standard Features for IFI T-MM Series TWT Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 & RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics & Status Indicators
  • Filament/Beam Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI T-MM Series TWT Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type K Female, unless specified otherwise
  • RF Output Connector: WR28 for frequencies from 27.5 – 38.0 GHz an WR22 for 40 – 45 GHz Other waveguides available by request or specification (see Option 117)
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: All types, AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Cabinet Integrated as needed
  • Spurious Outputs: <-60 dBc nominal
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    200, 220, 230, 240 VAC ±10% 50/60 Hz, single phase
    100/200VAC,115/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta and/or 400 Hz power is available.
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI T-MM Series TWT Amplifiers

  • Option 103 G/D: VSWR Reflected Power Protection “Graceful Degradation Feature” which will automatically reduce the input drive and fold back the output power when the average reflected power exceeds a preset limit of 3.0:1. The unit operates without damage or oscillation into any magnitude of phase or load impedance.
  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis Slides for 19” Rack Mounting
  • Option 118F or R: Front Panel RF Connections 118R for Rear Panel RF Connections
  • Option 123F or R: Reflected RF Sample Port -40, -50 or -60 dB N or SMA, Front or Rear Panel

 

T2618 Series Medium to High Power Millimeter TWT Amplifiers

 

18.0 – 26.5 GHz

10 – 200 watts
Minimum Rated Power

Amplifier Features:

  • Instantaneous Broadband Frequency range
  • Modular Design Construction
  • Rugged Construction & High Reliability
  • Backlit LCD Display
  • Integrated Force Air Cooling
  • Self-diagnostic circuitry
  • IEEE-488 interface, RS232 & Ethernet Remote available
  • Solid State Power Supply
 

Medium to High Power Millimeter TWT Amplifiers - T2618 SeriesInstruments for Industry, T2618 Series Amplifiers provide outstanding RF performance. Our “T2618 Series” products are a mature design but incorporate the latest features with respect to control and monitoring. These amplifiers are “State of the Art”; have field proven reliability and unsurpassed performance as the best in the industry. These products are available in a wide range of power levels from 10 watts to 200 watts in the 18.0 GHz – 26.5 GHz frequency range.

Operation safety and ease of use are paramount in IFI product designs. The IFI T2618 Series include a full complement of RF and hardware protection systems including high VSWR, over-current and voltage protection as well as redundant thermal and airflow sensors to prevent the TWT from overheating. In addition, the T2618 series includes a state-of-the-art interface that is sophisticated, comprehensive, but yet simple to use. Our amplifiers feature modular construction and this concept of modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

The backlit LCD screen shows forward/reverse power indication, system status and self-diagnostic information. All the amplifier operating parameters are simultaneously available in the amplifier front panel display as well as over the remote bus. Selection switches allow you to switch the amplifier to the desired mode of operation for local control if the unit is not being operated remotely.

For computer automation both an RS-232 and IEEE-488 interface are included. To meet individual application needs, the T2618 Series amplifiers can be easily customized with harmonic filters or other options. With this capability and its reliable elegant design, the T2618 series amplifiers are the perfect amplifier for your microwave needs. IFI offers different size packages and configurations to best suit your application. A product and design built to last!

Model Number Frequency Range
(GHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
Mains
(kVA)
Weight
(lbs.)
Size (Inches)
(W x D x H)
T2618-10 18.0 – 26.5 10 8 40 0.7 45 19 x 24 x 5.25
T2618-25 18.0 – 26.5 25 10 44 0.8 45 19 x 24 x 5.25
T2618-40 18.0 – 26.5 40 20 46 0.9 45 19 x 24 x 5.25
T2618-50 18.0 – 26.5 50 25 47 1.0 45 19 x 24 x 5.25
T2618-80 18.0 – 26.5 80 35 49 1.8 80 19 x 24 x 14
T2618-100 18.0 – 26.5 100 45 50 1.9 90 19 x 24 x 14
T2618-125 18.0 – 26.5 125 50 52 2.0 100 19 x 24 x 14
T2618-200 18.0 – 26.5 200 100 53 3.5 200 19 x 24 x 2x 14

 

 

Standard Features for IFI T2618 Series TWT Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open & Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 & RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics & Status Indicators
  • Filament/Beam Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI T2618 Series TWT Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type K Female, unless specified otherwise
  • RF Output Connector: WR42 Other waveguides available by request or specification (see Option 117)
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: All types, AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Cabinet Integrated as needed
  • Spurious Outputs: <-60 dBc nominal
  • Standard Prime Powers:
    100, 110, 115, 120 VAC ±10% 50/60 Hz, single phase
    200, 220, 230, 240 VAC ±10% 50/60 Hz, single phase
    100/200VAC,115/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta and/or 400 Hz power is available.
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI T2618 Series TWT Amplifiers

  • Option 103 G/D: VSWR Reflected Power Protection “Graceful Degradation Feature” which will automatically reduce the input drive and fold back the output power when the average reflected power exceeds a preset limit of 3.0:1. The unit operates without damage or oscillation into any magnitude of phase or load impedance.
  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis Slides for 19” Rack Mounting
  • Option 118F or R: Front Panel RF Connections 118R for Rear Panel RF Connections
  • Option 123F or R: Reflected RF Sample Port -40, -50 or -60 dB N or SMA, Front or Rear Panel

 

Connect With Us Here...

  • Facebook Page: 166434726735166
  • Linked In: company/instruments-for-industry
  • Twitter: #!/IFI_Amplifiers
  • YouTube: user/IFIAmplifiers

Instruments For Industry

903 South Second Street • Ronkonkoma, NY
(631) 467-8400 • Fax: (631) 467-8558 
© 2008 All rights reserved