SMIV EW-ECM Series Solid State Amplifiers

 

400 – 1000 MHz

10 – 5000 watts
Minimum Rated Power

Amplifier Features:

  • Solid State LDMOS & GAN Designs
  • Instantaneous Broadband Frequency Range
  • Modular Design Construction
  • Rugged Construction & High Reliability
  • High Speed T/R Switching (Optional)
  • Backlit LCD Display
  • Integrated Force Air Cooling
  • Self-diagnostic Circuitry
  • IEEE-488 Interface, RS232 & Ethernet Remote
 

Solid State Amplifiers - SMIV EW/ECM SeriesInstruments for Industry is a supplier of state-of-the-art solid-state RF power amplifiers. Our SMIV-Series products are specifically designed for EW Jamming applications. These products are available in a wide range of power levels from 10 watts to kilowatts in multiple frequency ranges from 1.0 MHz – 6.0 GHz. (See other model data sheets for other frequency ranges.)

Our RF power amplifiers feature heavy-duty individually shielded aluminum housings at the module level. This concept of shielded modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

OOur extremely fast gate bias controls at all of the amplifier modules permit a fast access noise quieting function in less than 1 microsecond. Optional PIN diode T/R switches provide complete EW solutions with very low receiver path losses typically in the range of 1.5 dB.

OIFI system level products include an easy to read backlit LCD screen display for immediate indication of forward/reverse RF power, system status and self-diagnostic information. The systems also provide interface capabilities for control and status by, Ethernet, RS-232 (or RS-422 or RS-485) and IEEE interface formats.

From the ground up the SMIV-Series are structurally engineered to withstand operation in mechanically hostile environments withstanding the shock and vibration of military vehicles and portable shelters. Ruggedized versions are available for airborne and shipboard applications.

Model Number Frequency Range
(GHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
kVA Weight
(lbs.)
Size (Inches)
(W x D x H)
SMIV10 400 – 1000 10 10 40 0.10 25 19 x 24 x 5.25
SMIV25 400 – 1000 25 25 44 0.20 28 19 x 24 x 5.25
SMIV50 400 – 1000 50 50 47 0.40 32 19 x 24 x 5.25
SMIV100 400 – 1000 100 80 50 0.50 36 19 x 25 x 7.00
SMIV150 400 – 1000 10 120 52 0.80 40 19 x 25 x 7.00
SMIV200 400 – 1000 200 160 53 1.4 50 19 x 25 x 7.00
SMIV250 400 – 1000 250 200 54 1.6 60 19 x 25 x 7.00
SMIV350 400 – 1000 350 250 56 3.0 80 19 x 24 x 8.75
SMIV500 400 – 1000 500 350 57 4.0 120 19 x 24 x 8.75
SMIV1000 400 – 1000 1000 800 60 8.0 250 (2X) 19 x 25 x 10.5
SMIV2000 400 – 1000 2000 1600 63 15.0 500 Rack Integrated
SMIV3000 400 – 1000 3000 2500 65 20.0 700 Rack Integrated
SMIV5000 400 – 1000 5000 4500 67 30.0 1000 Rack Integrated

 

Standard Features for IFI SMIV Solid State Series Amplifiers

  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • * Alternate Prime Power (specify at time of order)
  • GPIB IEEE 488 and RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local and Remote, 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics and Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display

 

IFI SMIV Solid State Series Amplifier Specifications

  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female up to 1KW amps, SC or 7/16 available, 7/16 2KW/3KW/5KW amps Other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1, 2.0:1 with full power
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    120/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability

Some Available Options for IFI SMIV Solid State Series Amplifiers

  • Option 110-1E: GPIB IEEE-488 RS232 and Ethernet Remote Control
  • Option 110-2: GPIB IEEE-488 and RS 422 Remote Control
  • Option 110-3: GPIB IEEE-488 and RS 485 Remote Control
  • Option 113: Chassis slides for a 19" rack mounting
  • Option 118A: RF Input On Front Output On Rear
  • Option 118B: RF Input On Rear Output On Front

 

Connect With Us Here...

  • Facebook Page: 166434726735166
  • Linked In: company/instruments-for-industry
  • Twitter: #!/IFI_Amplifiers
  • YouTube: user/IFIAmplifiers

Instruments For Industry

903 South Second Street • Ronkonkoma, NY
(631) 467-8400 • Fax: (631) 467-8558 
© 2008 All rights reserved