Transmit Receive Switch, Model TRS-90M-30M-500W

 

30 MHz – 90 MHz

500 watts
Rated Power

Transmit - Receive Switch Features:

  • Instantaneous Frequency ranges
  • Rugged Construction
  • High Reliability
 

Transmit Receive Switch - Model TRS-90M-30M-500WInstruments For industry, is a supplier of state-of-the-art RF power amplifiers and accessories covering broadband frequencies for virtually limitless applications. IFI supports a variety of markets with a full line of advanced products. Many of our products are specifically designed for EMC, EW & ECM applications so we also provide our customers with a wide range of RF & Microwave accessories to compliment other applications. These products are available in a wide range of power levels from a few watts to hundreds of watts for narrow and broad band frequency ranges. IFI’s RF products are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Our Technology Innovations are critical in supporting and meeting customer requirements. Call us with your requirements!

 

Transmit Receive Switch Model: TRS-90M-30M-500W General Specifications

  • Frequency Range: 30 – 90 MHz
  • Power Rating: 500 Watts peak, 50 Watts CW/Average
  • Prime Power: 5 VDC, or 28 VDC
  • RF Connections: J1 Common Antenna Port, N-F J2 Transmitter Port, N-F J3 Receiver Port, SMA-F
  • DC Connections: J4 9-Pin D sub

 

IFI Transmit Receive Switch Specifications

  • Operation Fequency: 30 – 90 MHz (up to 100 MHz)
  • RF Power Handling: 500W peak, 50W average into 2:1 load VSWR at all Phase angles.
  • Pulse Width: 2μ Seconds max.
  • Duty Cycle: 10%
  • Insertion Loss: 0.25 dB typical. 0.5 dB max.
  • Isolation: 60 dB min. all ports
  • Impedance: 50 Ohms nominal.
  • VSWR: 1.25:1 max. S11 all ports
  • VSWR Load Tolerance: 3:1 any phase angle @ full power 6:1 any phase angle for 10 msec while at 10% duty
  • Switching Speed: 250 nSec max.
  • Switching Rate: 100 kHz max
  • Max Video Leakage: In Band: 3.5V Total: 10V
  • Video Leakage Duration: 250 nSec
  • Control Logic: TTL
  • Connectors: N-Female, Common Antenna Port N-Female, Transmitter Port SMA-F, Receiver Port
  • Power Supply: 28V @300mA, or 5V @500mA.
  • Operation Temperature: -20 to +70 degrees C
  • Non-Operation Temperature: -40 to +80 degrees C
  • Size: 4” x 4.5” x 2.5” max.

Note: The antenna port and receiver port are DC grounded. There is built-in video filter at receiver port to minimize the pulse transient leakage.

Specfications are subject to change without noticification © IFI-2011

Connect With Us Here...

  • Facebook Page: 166434726735166
  • Linked In: company/instruments-for-industry
  • Twitter: #!/IFI_Amplifiers
  • YouTube: user/IFIAmplifiers

Instruments For Industry

903 South Second Street • Ronkonkoma, NY
(631) 467-8400 • Fax: (631) 467-8558 
© 2008 All rights reserved