Frequency Range:

  • Instantaneous frequency range: 10 kHz to 1 GHz

  • Performance Characteristics:
    • Gain: 5dB
    • Gain control range: > 40 dB
    • Leveled flatness: ± 0.25 dB
    • Non-leveled flatness: ± 1.0 dB
    • Compression: < 1.0 dB at 0 dBm
    • Intercept point: + 1.0 dB
    • Maximum harmonics: -25 dBc
    • Third-order intercept: -30 dB
    • Noise: 8 dB at zero attenuation
    • Sensor input sampling rate: 500
    • samples per second per input

    Automatic Leveling (LMT mode):


    • Manual-preamplifier with voltage variable
      gain control dial
    • Remote Detector-automatic leveling is controlled by a
      detected voltage
    • LMT-automatic E-field leveling using E-field sensors
      (not supplied) connected to the LPA-5’s fiber optic or
      coaxial inputs
    Automatic Leveling (LMT mode):

    • Minimum-sets the E-field level to coincide with the
      minimum value of any one sensor
    • Maximum-sets the E-field level to coincide with the
      maximum value of any one sensor
    • Average-sets the E-field level to an average constant
      value by evaluating all sensor inputs and adjusting
      the gain appropriately

    RF Signal Connectors:


    • Input: Type BNC located on front panel
    • Output: Type BNC located on front panel

    Frontal Panel display & control:


    • Backlit amber LCD screen with contrast
      adjustment
    • Gain control dial with infinite resolution
      adjustment
    • Numeric keypad allows for direct function
      access through on screen instructions and queries
    • Zero adjustment pot dial for each fiber optic
      sensor input
     
    Electrical Power Requirements:
    • 115 or 230 Volts AC single phase +/- 10%
    • (customer must specify at time of order)
    • 50/60 Hz line frequency
    Dimensions & Weight:

    • Height: 5.25” (13.3cm)
    • Width: 19.0” (48.3cm)
    • Depth: 17.0” (43.2cm)
    • Weight: 19lbs. (8.6kg)
    Environmental Requirements:
    • Operating temperature: 32° to 113°F (0° to 45°C)
    • Relative humidity (without condensation): 95%
    • Maximum altitude: 10,000 ft. (3,048 m)
    Available Options:

    40 GHz Frequency Extension
    18 GHz Frequency Extension

    • Extends the upper frequency range from 1GHz to either 18 GHz or 40GHz
      IEEE-488 Interface
    • Allows for remote computer control of all functions of the LPA-5
    • Ability to control automated systems with EMC testing software
    Available Models :

    LPA - 5A • 8 fiber optic inputs
    LPA - 5B • 4 fiber optic inputs
    LPA - 5C • 4 fiber optic inputs and 4 BNC coaxial inputs


    Top Of Page


    Page1 Additional Specifications